.404 Jeffery Brass

I am trying to source RWS .404 Jeffery brass for a 330 Dakota I have. I already have 60 but need some more. It seems NZ Ammunition who I purchased the original brass from now only have Norma and I need all the same type. Does anyone know a secret source for this brass?

Thanks

Attachment 67356

Quote:

---

Originally Posted by Dermastor

I am trying to source RWS .404 Jeffery brass for a 330 Dakota I have. I already have 60 but need some more. It seems NZ Ammunition who I purchased the original brass from now only have Norma and I need all the same type. Does anyone know a secret source for this brass?

Thanks

---

I have permits to get it out of the States if you can find some over there.

Not a cheap exercise but doable.

I was able to get RWS brass for 9.3x64b in Australia.

Ok so after more research or should I say searching why not use 33 Nosler brass for my 330 Dakota? Same parent case 404 Jeffery basically the same design give or take a bit. Could use the 30 or 338 RUM brass but its as rare as hens teeth and I would have to knock the shoulder back a bit. So is there anyone bringing the Nosler brand of brass into NZ? Have had a pointless search around the traps and no luck. Natchez have it in the States but getting it here is the problem. There must be someone with a cunning plan out there.

Attachment 67504

Quote:

---

Originally Posted by Dermastor

So is there anyone bringing the Nosler brand of brass into NZ? Have had a pointless search around the traps and no luck. Natchez have it in the States but getting it here is the problem. There must be someone with a cunning plan out there.

---

Quote:

---

Originally Posted by Kiwi Greg

I have permits to get it out of the States if you can find some over there.

Not a cheap exercise but doable.

---

As mentioned no problem...

Quote:

---

Originally Posted by Kiwi Greg

Back on track again, some brass this morning :)

http://i1004.photobucket.com/albums/...psbephsn5f.jpg

---