Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Darkness DPT


User Tag List

+ Reply to Thread
Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 51
Like Tree14Likes

Thread: 7mmSaum Load Ratio in Model 7

  1. #16
    Member
    Join Date
    Mar 2014
    Location
    New Plymouth
    Posts
    1,739
    I've been using Hodgdon Superformance powder with 140gn B Tip at 3080 mag fit in my model 7 22"

    Sent from my SM-G900I using Tapatalk

  2. #17
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,371
    Does it have another name of equivalent in ADI...can't see it on Quickload....

  3. #18
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Norf
    Posts
    5,430
    running RL19 on 150 gn partitions (for bush 0 -300 yd) - would have to look up exact load, but less than 60gns.
    And 64 - 65 gn 2217 with 162 AMAX - slightly compressed load, but careful, slow trickle with lots of tapping during filling helps.

  4. #19
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,456
    Quote Originally Posted by Tikka7mm08 View Post
    Does it have another name of equivalent in ADI...can't see it on Quickload....
    I don't believe there is an equivalent, it's too new for my ver of QL

    Sent from my SM-G900I using Tapatalk
    Tikka7mm08 likes this.

  5. #20
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,371
    Quote Originally Posted by chainsaw View Post
    running RL19 on 150 gn partitions (for bush 0 -300 yd) - would have to look up exact load, but less than 60gns.
    And 64 - 65 gn 2217 with 162 AMAX - slightly compressed load, but careful, slow trickle with lots of tapping during filling helps.
    Yes fair bit of tapping with 2217...even stuck one of the kids electric toothbrushes against the case but didn't make much difference.

  6. #21
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    11,852
    Based on my experience with 300saum in various bullet weights and your QL results I would walk straight to n550 and try that.

  7. #22
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    Quote Originally Posted by Tikka7mm08 View Post
    Yes fair bit of tapping with 2217...even stuck one of the kids electric toothbrushes against the case but didn't make much difference.
    Have you tried a long drop tube? I have a home made drop tube about 500mm long and I can get around 1.5mm further settle (depending on powder) in a 284 sized case.

  8. #23
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,371
    Yep...N560 runs a little denser but crikey great velocity!

  9. #24
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,371
    Quote Originally Posted by zimmer View Post
    Have you tried a long drop tube? I have a home made drop tube about 500mm long and I can get around 1.5mm further settle (depending on powder) in a 284 sized case.
    What did you make it from...I have little to no engineering ability... @MSL

  10. #25
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,258
    Have you looked into a VLD type seating stem for your dies? Some of these have a different taper inside to avoid the ring left on the projectile.

  11. #26
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,371
    No...but I will now...

  12. #27
    Member camo wsm's Avatar
    Join Date
    Aug 2012
    Location
    Tauranga
    Posts
    1,850
    Had the same with my saum used a drop tube and vld stem as was getting marks on the 162's

  13. #28
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    Quote Originally Posted by Tikka7mm08 View Post
    What did you make it from...I have little to no engineering ability... @MSL
    Mine's is pretty crude - a piece of straight copper pipe left over from my house build. A funnel cut as required and epoxied to the tube.

    The secret then is to tip the powder into the funnel and create a swirling effect like water going down a plug hole. Much more effective than just tipping it into the funnel.

    Obviously still need to put your normal funnel on the case unless you can do something smart with the bottom of the tube to fit nicely to the neck but then it will be limited to just one caliber.

    Had it for many years and have meant to make a flash harry one but no need.

    I seem to end up using the slowest powders for my cartridges so most of them are chocka and need the drop tube.
    Last edited by zimmer; 22-02-2017 at 10:11 AM.
    Tikka7mm08 likes this.

  14. #29
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    Name:  20170222_100733.jpg
Views: 426
Size:  347.3 KB
    Tikka7mm08 likes this.

  15. #30
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,371
    Quote Originally Posted by camo wsm View Post
    Had the same with my saum used a drop tube and vld stem as was getting marks on the 162's
    It is your Saum from memory...!
    camo wsm likes this.

 

 

Similar Threads

  1. 45-70 and 7mmSaum
    By Tikka7mm08 in forum Firearms, Optics and Accessories
    Replies: 9
    Last Post: 09-08-2016, 03:32 PM
  2. Rem 700, 708 into 7mmsaum?
    By llewelyn in forum Firearms, Optics and Accessories
    Replies: 13
    Last Post: 12-02-2016, 10:13 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!