Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

ZeroPak Darkness


User Tag List

+ Reply to Thread
Page 2 of 7 FirstFirst 1234567 LastLast
Results 16 to 30 of 99
Like Tree37Likes

Thread: Case Tumbler

  1. #16
    Member
    Join Date
    Dec 2011
    Location
    Auckland
    Posts
    1,766
    Quote Originally Posted by steven View Post
    Yup that's what I picked up. Only down side to them is the drum can slip sometimes if it's overloaded.

  2. #17
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,451
    Knocked up my own. It's basically a 150mm round Sistema food storage container with a couple of agitators glued to the inner walls, whacked in the lathe. Tried it today, worked great. It also cost $6.50, although it helped having a lathe

    [ATTACH=CONFIG]39090
    Attached Images Attached Images  
    Ryan likes this.

  3. #18
    Member
    Join Date
    Mar 2015
    Location
    Auckland
    Posts
    564
    you use that lemi-shine i gave you?

  4. #19
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,451
    Aha! Yep, half a teaspoon and a little squirt of Palmolive dishwash for good measure. Ran it for 2.5 hours, and I'm pretty sure the last hour wasn't needed.. Figured out a good way of separating the brass and the pins too -without the fancy separator. To rinse I just tipped it all into a 20l bucket, half filled with water, sloshed it about, tipped most of the water out, repeat. Then, once I filled it up again I just picked up four or five at a time loosely and shook them a little as I lifted them out. Takes a couple minutes to do the lot but once I'd got them out and into a container with the lid on - not one pin in the container

  5. #20
    Member 300CALMAN's Avatar
    Join Date
    Dec 2014
    Location
    NZISTAN
    Posts
    5,215
    I got one of these:
    Thumler's Tumbler Model B Rotary Tumbler : Cabela's
    Works bloody well.

  6. #21
    Member 300CALMAN's Avatar
    Join Date
    Dec 2014
    Location
    NZISTAN
    Posts
    5,215
    Quote Originally Posted by Tommy View Post
    Knocked up my own. It's basically a 150mm round Sistema food storage container with a couple of agitators glued to the inner walls, whacked in the lathe. Tried it today, worked great. It also cost $6.50, although it helped having a lathe

    [ATTACH=CONFIG]39090
    Ha Classic Kiwi ingenuity!
    Wish I had a lathe.

  7. #22
    Member
    Join Date
    Mar 2015
    Location
    Auckland
    Posts
    564
    yep, you can use more Palmolive, about 2 table spoons is what i use,

  8. #23
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,451
    Sweet will put more green goodness in the next batch ( in the morning)

  9. #24
    Member
    Join Date
    Apr 2012
    Location
    canterbury
    Posts
    1,621
    We just need the stainless pins to be readly available in nz

  10. #25
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,451
    They are. If you're careful they last forever too

  11. #26
    Member 300CALMAN's Avatar
    Join Date
    Dec 2014
    Location
    NZISTAN
    Posts
    5,215
    Quote Originally Posted by longrange308 View Post
    We just need the stainless pins to be readly available in nz
    Serious Shooters has them and the shine additive
    Serious Shooter Stainless Pins for Tornado Tumbler - tumbler, pins, tornado, extra, supplied, ... - Serious Shooters

  12. #27
    Member
    Join Date
    Mar 2015
    Location
    Auckland
    Posts
    564
    Quote Originally Posted by Tommy View Post
    They are. If you're careful they last forever too
    yep, sinks stolen a couple off mine,

    if you ever find it not coming up as clean just run it with some simple green for a hour or 2, (no brass) it will clean up the pins nicely,

  13. #28
    Member Danny's Avatar
    Join Date
    Aug 2013
    Location
    Central NI
    Posts
    5,052

    I got bored and semi inspired...


    Sent from my iPhone using Tapatalk
    veitnamcam and Beaker like this.
    Dan M

  14. #29
    Member
    Join Date
    Dec 2014
    Location
    Hamilton
    Posts
    153
    whats going on with your thumb

  15. #30
    Member
    Join Date
    Mar 2015
    Location
    Auckland
    Posts
    564
    NICE!,

    i started making a home made tumbler, but in the end i bought one, a Extreme Tumblers Rebel 17, from Stainless Steel Reloading Supplies | Tumblers, Separators, Media, Brass & More!
    the NZ$ was way stronger, and i picked it up while holidaying in the US, brought it back in our luggage

 

 

Similar Threads

  1. case tumbler
    By deye223 in forum Projects and Home Builds
    Replies: 100
    Last Post: 23-12-2016, 07:51 PM
  2. Case tumbler
    By Tommy in forum Reloading and Ballistics
    Replies: 4
    Last Post: 21-07-2015, 07:07 PM
  3. Wet Brass tumbler Nelson Region
    By k262626 in forum Reloading and Ballistics
    Replies: 1
    Last Post: 27-04-2014, 10:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!