Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

ZeroPak DPT


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 26
Like Tree20Likes

Thread: School me on the 7mm Rem Mag

  1. #1
    nak
    nak is offline
    Member
    Join Date
    Jun 2016
    Location
    Oz
    Posts
    94

    School me on the 7mm Rem Mag

    Hi Fella's,

    I'm headed over the ditch to hunt tahr with a kiwi colleague in early November...

    I was going to bring my .270, but given that my opportunities to hunt tahr are pretty limited (10 years since my last trip), I thought I'd give myself a bit more margin for error as well as giving me a bit more knock down power if a nice bull presents itself a bit further out, So today I ordered in a t3x tikka in 7mm rem mag. It will be ready to pick up in a month. I'll pair it with a zeiss victory 3-12x56.

    This cartridge seems to pretty well regarded by blokes on here and on the 'other' forum for tahr, and seems like it should do the job. I'm comfortable shooting out to around 350-400m or so - haven't ever had the need to shoot any further and most of my hunting over here is done at ranges under 150.

    Any advice on good loads of tahr - what weight projectiles work well ? What about powders - I've got lots of ADI 2213sc left over from loading for my .270. Hopefully, I will get a chance to work up some loads for it, but if I don't get a chance what good factory loads are out there?

    Any other comments or experience with the 7mm mag for tahr would be appreciated.

    Cheers,

  2. #2
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    4,850
    The 162 gr go well in 7mm mag. 2217 or 2225 go better with that weight. With 2213 you probably want to use a 150gr projectile. I ran a 160 accubond as a close range load and then 162 a-max for 300 yds plus. Now the 162 eld-x or eld-m would be the pick. You could try a 150gr longrange accubond as a one projectile load. the 168gr berger was also a good projectile. You need something with a good BC because of the wind in the mountains.
    Best bit of advice with the T3 is to get a limbsaver recoil pad, although the new t3x might be better than the old t3 reocil pad.
    nak, Tim Dicko and T.T like this.

  3. #3
    nak
    nak is offline
    Member
    Join Date
    Jun 2016
    Location
    Oz
    Posts
    94
    Yep - I know what you mean about the pad. I use a 9.3x62 T3 battue for Sambar over here and it was rather unpleasant under recoil before I swappped the stock pad to a limbsaver, much nicer now. They've apparently upgraded the pad on the new model, but I haven't seen one in the flesh.

  4. #4
    northdude
    Guest
    @Carpe Diem hes got a pretty wicked shooting one he might pop in and share a few tips
    nak likes this.

  5. #5
    #KnowsFuckAll Dorkus's Avatar
    Join Date
    Jul 2015
    Location
    Mangawhai
    Posts
    1,310
    I'm shooting a Berger 168 VLD over 2225 with good results. Haven't shot a Tahr but kills red deer out past 400 no worries
    hotsoup likes this.
    "I heard Jesus did cocaine on a night out. Eyes wide-open, dialated, but he's fine now. And if his father ever finds out, then he'd probably knock his lights out...
    Gets a little messy in heaven "
    - Venbee

  6. #6
    If your not fast your last Shootm's Avatar
    Join Date
    Dec 2011
    Location
    Mighty Manawatu
    Posts
    3,079
    Quote Originally Posted by stug View Post
    Best bit of advice with the T3 is to get a limbsaver recoil pad
    Or a decent brake, get a Terminator T2 and you are sorted. Then you won't get beaten up running a decent load. Looks like a good combo, good luck on your hunting trip.
    Tim Dicko likes this.

    I Have Sexdaily. I mean Dyslexia! Fcuk!

  7. #7
    Member
    Join Date
    Jul 2013
    Location
    Godzone, South Island
    Posts
    1,705
    Ive used a 7mm Mag for over 30 years, shot a lot of tahr. The one load that has always been consistent is 140gn SGK over 70gns of either 4831 or 2213SC. Now apparently this is a hot load, but not in my rifle. Checked it last weekend, 5 shots in the magic 1", 3140fps over the chrony. Am now playing with the 154SST just for shits and giggles, and it performs well. But its always the 140SGK's I take when I go hunting.
    And theres no need to shoot tahr way out at beyond 400, there are plenty of animals in good terrain that are closer. The average distance for all the tahr I've shot or been in on, would be about the 150-180 mark. Remember after you shoot it you still gotta retrieve it so may as well close the gap before you pull the trigger.
    Good luck, have fun, they are one helluva trophy to chase.
    Micky Duck, nak and T.T like this.

  8. #8
    Valued Member 7mm Rem Mag's Avatar
    Join Date
    Dec 2016
    Location
    North Otago
    Posts
    1,869
    From what I have read on this forum stug gives about the best advice on loads so what he has suggested would be a good starting point, I have the same riffle you have stated and am running 162 grain ELDX which I have found does a great job. My bro does all my loads and I have lost the piece of paper with it all written down so I'm sorry I can't help you for now with the full load however I do know it is travelling just under 3000 FPS. Some hunters prefer to get in close as Husky1600 has suggested however the 7mm rem mag has got serious legs and can drop animals out to long ranges so as long as you know where your bullet is going why not use the riffle for what it was designed for. Good luck with your hunting and enjoy your riffle, it's a great caliber as you will soon find out.
    When hunting think safety first

  9. #9
    Member
    Join Date
    Jul 2012
    Location
    Invervegas
    Posts
    4,520
    And if you're coming in November - its "low-vember", and the bulls are generally low to very low then (we've seen mobs of 30 bulls in a riverbed), this might not alter the range at which you have to shoot, but it does sometimes make recovery easier.

    I've shot a bunch of Tahr with a 250-3000 right through to my favorite - a 7x64 (162 amaxs up till now), which is 7mm Rem mag "lite". At the end of the day as with all game a poorly placed shot is going to give a poor result no matter - no amount of additional power will change that - especially with Tahr which are not "tough" if hit right, but are "bloody tough" if hit wrong.

    You mentioned you'd been shooting a 270, which is for all intents and purposes the same to shoot as a 7mm Mag, IF the rifle's weight is the same - how does your new rifle compare with your 270?. If you can shoot your 7mm Mag as much as you can before you go to ensure you can place your shots with complete confidence.

    Shooting in mountain terrain is a lot different to any other hunting situation and not getting or compromising "field position" causes lots of misses (half the Tahr videos on the web have a clean miss at a moderate range and I've done it myself all to often).
    Last edited by Tentman; 12-08-2017 at 08:37 PM.

  10. #10
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    3,907
    I load 162 gr Hornady A-Max with 65 grs of AR 2213 SC for 2955 fps average. I haven't shot tahr with that load but a few deer and it works ok. I think the ELD-x 162 gr bullet with that charge should be good. I am loading for a Rem 700, so you should work up to that load in your rifle as it is over max in the books form memory but ok in my rifle.
    Another bullet that would be good would be the Noslar 160 gr Accubond.

  11. #11
    Member Boaraxa's Avatar
    Join Date
    Jul 2014
    Location
    Southland
    Posts
    2,496
    I was going to say get a muzzle break or suppressor on there first to reduce recoil id never used either until recently on a browning 7mm mag the break is really good , are you guys across the ditch even allowed to have a thread on your barrel ?

  12. #12
    northdude
    Guest
    when I lived there you just weren't allowed suppressors
    Fred Fisherman likes this.

  13. #13
    Member
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,340
    No to suppressors here.


    Sent from my iPhone using Tapatalk

  14. #14
    nak
    nak is offline
    Member
    Join Date
    Jun 2016
    Location
    Oz
    Posts
    94
    Thanks everyone. I've got plenty of 2213sc to burn so I might start with working up a load for something around 150gn. Has anyone tried the 150gn Ballistic tips, or the Woodleigh 140's or 160's? ELD-X or ELD-M, and nosler LR accubond are all not so readily available over here.

    No issues with threaded barrels for muzzle breaks, although I find them obnoxiously loud, so I'll see what the recoils like. No suppressors unfortunately - too scary for our gov

    Tentman - yep I understand your point about shot placement, wasn't trying to compensate for that. Rather if I get a shot at a nice animal I want everything in my favour and the extra oomph of the magnum I'm sure won't go astray - and anyway my .270's a bloody boat anchor and would rather not be lugging that around NZ hillside...

  15. #15
    Member Shearer's Avatar
    Join Date
    Sep 2013
    Location
    Tasman
    Posts
    6,533
    Hey @nak.
    I am running 150gn Nosler BTs in front of 70gns of AR2213sc. I started with this load as it was recommended by Greg Duley (NZ Hunter) as his go to 7mmRM accuracy load. It didn't disappoint. Not super fast in my rifle (T3 24" barrel) @3063 fps but the charge is well above ADI book max. No sign whatsoever of excess pressure though.
    Last animal shot with it was a bull Tahr with the perfect result so I would not hesitate to use it again on tahr out to my (personal) maximum range of 600 yards.
    T.T likes this.
    Experience. What you get just after you needed it.

 

 

Similar Threads

  1. 7SAUM School me...
    By 300_BLK in forum Firearms, Optics and Accessories
    Replies: 8
    Last Post: 06-06-2017, 08:54 PM
  2. Doing it old school.
    By JonP in forum The Magazine
    Replies: 16
    Last Post: 25-08-2015, 08:04 PM
  3. School me on 7mm08
    By ChrisF in forum Reloading and Ballistics
    Replies: 20
    Last Post: 29-04-2015, 08:35 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!