Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Night Vision NZ


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 16
Like Tree17Likes

Thread: Sytong advice please.

  1. #1
    Member
    Join Date
    May 2014
    Location
    Dunedin
    Posts
    171

    Sytong advice please.

    Bored and getting an itchy money finger,money which I don't have according to the financial controller.So doing the right thing and ignoring her and asking you gentlemen.Looking at the Sytong HT 60 and can't decide between the 3.5 to 8x or the 6.5 to 13x,or go the clip on HT 66???.
    Shooting will be rabbits on my land at 10m to 80m also wallabys up the Haka valley at 10m to 250m.Pigs at 2m to 100m.
    Rifles will be 17HMR,22lr,223,7mm08 and 50cal PCP.
    Any users out there willing to part with wisdom.
    Or marriage guidance experts willing to talk me out of it.
    Thanks in advance.
    Phil_H and Chelsea like this.

  2. #2
    Member
    Join Date
    Jun 2018
    Location
    Christchurch
    Posts
    585
    Have a look at the pard units aswell, they are bloody good.

  3. #3
    Member
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,957
    3.5 to 8 is enough for 22lr
    i have the 6.5-13 on my 22mag
    bloody good bang for the buck
    my "financial controller" doesnt know i have one, or the 22 mag either.....or the little p/a shotgun......or........
    issue is she wouldnt be mad, she would claim them as her own.
    Phil_H likes this.

  4. #4
    Member
    Join Date
    May 2014
    Location
    Dunedin
    Posts
    171
    They look to be the same thing or at least very close,but for the price.

  5. #5
    Member
    Join Date
    May 2014
    Location
    Dunedin
    Posts
    171
    Quote Originally Posted by gonetropo View Post
    3.5 to 8 is enough for 22lr
    i have the 6.5-13 on my 22mag
    bloody good bang for the buck
    my "financial controller" doesnt know i have one, or the 22 mag either.....or the little p/a shotgun......or........
    issue is she wouldnt be mad, she would claim them as her own.
    Hows the 6.5x for scanning?
    My CFO would require a thinning of assets to offset the purchase,depending on how creative I get with the books.
    tetawa and Phil_H like this.

  6. #6
    Member
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,957
    Quote Originally Posted by rewd View Post
    Hows the 6.5x for scanning?
    My CFO would require a thinning of assets to offset the purchase,depending on how creative I get with the books.
    works fine but hasnt had much use yet

  7. #7
    Member Marty Henry's Avatar
    Join Date
    Oct 2014
    Location
    Tararua
    Posts
    7,045
    The clip on unit has some advantages in certain situations.
    As a handheld scanner it's better than a dedicated scope as it has a lower magnification and is as easy as binos versus scope to handle just looking around..
    In conjunction with a rifle mounted spotlight it's a good combination.
    It mounts to the rear of your normal scope adding length so a recoil pad needs to be added to get eye relief and comfortable hold back but there's no change in zero.
    To get the best from it your scope needs to have parallax ajustment as ir focuses to a different point from visible light.
    You can use the scopes optical zoom rather than the digital one.
    The illuminator range seems to be the same as for the dedicated scopes.

    The dedicated scopes are pretty good but not up to the optical standard of a proper one. You are in effect looking at a smallTV screen and the image lacks depth same with the clip ons.
    During the day nv scopes and the clip ons tend to suffer from poor image quality compared to dedicated optics if there's a lot of contrast in a scene.
    They do have the advantage that you can set up a rifle and leave it.
    I have had a pard 007 clip on for over a year and am pretty happy with it. It took quite some time to learn how to use it effectively. For me coupled with a Thermal scanner it does the business.
    I bought mine before Ken started importing and the price has dropped quite a bit.
    Anyhow those are my thoughts.
    Phil_H likes this.

  8. #8
    Member
    Join Date
    May 2014
    Location
    Dunedin
    Posts
    171
    Quote Originally Posted by Marty Henry View Post
    The clip on unit has some advantages in certain situations.
    As a handheld scanner it's better than a dedicated scope as it has a lower magnification and is as easy as binos versus scope to handle just looking around..
    In conjunction with a rifle mounted spotlight it's a good combination.
    It mounts to the rear of your normal scope adding length so a recoil pad needs to be added to get eye relief and comfortable hold back but there's no change in zero.
    To get the best from it your scope needs to have parallax ajustment as ir focuses to a different point from visible light.
    You can use the scopes optical zoom rather than the digital one.
    The illuminator range seems to be the same as for the dedicated scopes.

    The dedicated scopes are pretty good but not up to the optical standard of a proper one. You are in effect looking at a smallTV screen and the image lacks depth same with the clip ons.
    During the day nv scopes and the clip ons tend to suffer from poor image quality compared to dedicated optics if there's a lot of contrast in a scene.
    They do have the advantage that you can set up a rifle and leave it.
    I have had a pard 007 clip on for over a year and am pretty happy with it. It took quite some time to learn how to use it effectively. For me coupled with a Thermal scanner it does the business.
    I bought mine before Ken started importing and the price has dropped quite a bit.
    Anyhow those are my thoughts.
    Perfect.
    Thanks.

  9. #9
    Member
    Join Date
    Oct 2020
    Location
    Kapiti
    Posts
    330
    Use the clip on Sytong HT-66 if your gun is a dual purpose day/night rig or if you want to share night vision capability across multiple rifles. This unit is 1x so inherits your scopes magnification setting. It also has digital zoom in 0.5 steps at the push of a button.
    The rifle scope version HT-60 is better used on a dedicated night vision rig.
    And just to throw another option into the mix we have the Sytong HT-660 landing next week. This is the same as the HT-66 add-on but instead of a built in IR torch it has a picatinny rail for mounting your choice of IR lighting. You can go with an 850nm torch which gives you range or 940nm torch which is less visible to deer but has less range. It also has an upgraded 5MP Sony Starvis sensor over the standard Sony 1080P sensor.
    Danger Mouse likes this.

  10. #10
    Member Marty Henry's Avatar
    Join Date
    Oct 2014
    Location
    Tararua
    Posts
    7,045
    I'm willing to trial one Ken😆😆
    55six likes this.

  11. #11
    Member Ben Waimata's Avatar
    Join Date
    Jul 2018
    Location
    Hawkes Bay
    Posts
    1,722
    Does the clip-on unit come on and off fast? Can you use it as a handheld to get around at night, and mount it back on to the scope in time to knock over a deer?

  12. #12
    Member
    Join Date
    Oct 2020
    Location
    Kapiti
    Posts
    330
    Yes it’s quick detach

  13. #13
    Member hotbarrels's Avatar
    Join Date
    Aug 2012
    Location
    Auck
    Posts
    1,792
    From a previous posting of mine regarding PARD 008's:

    I have two, one on a .17HMR (Gen1) for rabbits and one on a Creedmore (Gen2 with OLED screen) for deer on private land. They are excellent.

    Advantages:
    1/2 the weight of the Pulsar's
    While they look 'different' they actually have good ergonomics once mounted
    Battery life is excellent, and easy to replace because its a standard 18650 - no special battery.
    I can get 4-6 hours out of a single battery hunting rabbits with the laser illuminator on 100% output, but turning the screen (and illuminator) off between shots while looking for the next candidate with the thermal bino's.
    'Instant on' from cold or screen off mode is very quick. From the screen off mode it is instant. This means you can single push the power button to shut the screen off, then push it once and it will instantly turn on.
    You can program the unit to start up from cold in a bunch of different modes - colour/black and white, illuminator on/illuminator off, illuminator power setting, magnification, etc. This makes it super easy to have it preset for opportunity shooting - oh look, a deer ..... hit power button and its good to go.
    The laser illuminator (yes, it is a laser, not a 'torch') is switched on/off with the screen to conserve battery. This means you don't have to be turning it on/off separately.
    The laser illuminator has plenty of boogie for any hunting out 100-150m. Beyond that, I wouldn't feel safe squeezing the trigger.

    Disadvantages:
    I find the magnification a bit high. Using thermal bino's set to 2.5x for scanning rabbits, then having to change over to 6x IR takes an extra couple of seconds to adjust to. 3-4 power would be ideal.
    An 'issue' for all IR units, is that the objective lens needs to be focused on a regular basis depending on hunting distances. This is not the easiest thing to do if you are trying to hold the rifle up unsupported while using your non trigger hand to adjust the focus. Shooting off a bi-pod or tripod is no issue.
    The Gen2 model with the OLED screen is a sales pitch only, and I actually prefer the non-OLED units as there is less (no) fishbowl effect. I would happily swap out an as new Gen1 for my Gen2 if anyone wants to swap??
    IR wash out is an issue if you have ANY reflective objects in close proximity to your rifle eg, long grass, vehicle, ground contour, tree, etc. This also applies to any haze in the air eg smoke or fog. Not an issue for thermal.
    They are not at their best in the middle of the day under very bright sunlight (high contrast), but sill perfectly usable. They are excellent in the dying light when normal optics has long gone, or in low light looking into shadow areas.

    Hunting recommendations:
    Anyone who has used thermal/IR for any reasonable duration of hunting will tell you that trying to use a rifle mounted thermal/IR for scanning is extremely tiresome. The very best solution is a thermal hand held and either a thermal or IR rifle scope, so keep that in mind when you are doing your budget - you will ultimately want a handheld.
    Get a red led headlamp for safely walking around in the dark to get from shooting spot to shooting spot without spooking your game. I use a Aliexpress one that takes 18650 batteries and it works a treat.
    I find with rabbits, where I shoot, seem to feel safe when I have the red torch on up to about 90m. Closer than that and they will start to move off, For that reason, I use the .17HMR.
    If you are hunting by walking around, I strongly recommend a standing height shooting tripod. I use a Primus trigger stick https://www.primos.com/shooting-stic.../PO-65815.html Yes, they are expensive, but they are light and instantly adjustable for the ground conditions and the rifle height required. If you are not using a handled for spotting, factor one of these into the cost of an IR scope because I can guarantee you will end up getting one.

    Now you have a problem - you have to carry a rifle, a tripod, and a handheld, and they are all expensive pieces of kit that you don't what to get banged around.
    My solution and current setup is as follows:
    Set your rifle up with a sling that allows in the front, barrel down carry, like the good old days when you used to own AR's. This make it super easy to have your rifle slung across your front, your trigger stick tripod in your weak hand, and your thermal handheld in your strong hand.
    With the front mount sling, it is super easy to stand the tripod up and place the rifle on the yoke without having to adjust your sling length.
    For handheld thermal storage while shooting, I have one of my old (AR) mag dump pouches mounted on my belt on my strong hand side with a piece of sleeping mat foam cut to fit the bottom of the pouch to keep it open like a bucket. Super easy to flip the lens cap closed and drop it into the mag pouch (bucket) rather than trying to fiddle it into or out of its case. Its protected by the foam. Having it on your belt keeps it away from your rifle which is slung across your chest ie a chest bino harness wont work.

    It is a very effective method of open ground pest control. Due to the IR illuminator flare, do not buy these units for bush use.





    Since that posting, I have also invested in a Sytong HT-60 3x-8x for the lower magnification to mount on a dedicated .22LR Quite shooting segmented ammo for close range instead of buying a PCP.

    My thoughts on the Sytong:
    There really isn't anything in it when comparing the Sytong and the PARD. On my units, sitting side by side, I would rank them Gen 1 PARD, Gen 2 PARD, then Sytong in terms of image quality. Between the Gen 2 PARD and the Sytong you really are splitting hairs. If you owned one or the other, you wouldn't be wanting to sell the one you have to buy the other, so don't make your purchase decision based on that. I still rate the Gen 1 PARD highest as it has the non-OLED screen.
    The lower magnification of the 3x-8x is definitely an advantage at .22LR and PCP ranges. Big, big, plus. But, if you are shooting a .17HMR and hunting rabbits out beyond 100m, that is where the higher magnification (native) comes into play. Don't be fooled by the zoom - it is not an optical zoom, its digital, and the picture quality degrades very quickly. You need to work out if you want 3x, or 6x and buy the unit accordingly, or get a clip on, for which I have zero experience with.
    If you are looking to hunt larger game (pigs and deer), I would favour the lower magnification Sytong in 3x.
    The one small problem I have run into with the Sytong, on my CZ .22, is that the side mounted IR illuminator (compared to the top mounted illuminator on the PARD) seems to bounce spent cases back into the action when cycling the bolt. I have to rotate the rifle as I cycle the bolt to ensure I don't get a jam. Different bolt cycle speeds makes no difference - they bounce back every time. If this was on a rifle that I was using a bi-pod with, I would need to go for a higher mount setup. I currently run mine as low as I can, with only just enough height for the bolt to clear the bottom of the optic.

    Hope this helps.

  14. #14
    Member
    Join Date
    Oct 2020
    Location
    Kapiti
    Posts
    330
    Quote Originally Posted by berg243 View Post
    is there a model available with a built in range finder?
    Yes here next week.4-500 less than competing model.
    berg243 likes this.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!