Thread: Bathroom Reno

A bit more progress and a lesson,Don't think you are an electrician
The original plan was to take the wiring up to a socket in the garage wall,(bathroom and garage on RCD)behind shower outlet(post 24)once the screed was done it became more obvious this would not work (thermostat pickup)post 30 shows draw wire.
So!,heated towel rail feed will do,trip RCD,try the hair dryer,nada! Dismantle heated towel rail,cover ends of wire with insulation tape,poke a small hole in wall,spend 1/2 hour catching draw wire,paint on waterproofing,clean up,turn on.""..no,hang on towel rail wires are taped,lightbulb,put the switch in minus towel rail sneaky,nastie,unseen biteies.
The FN towel rail is on the Kitchen lights FFS
That man deserves a DB

You haven't put the hand and foot holds in for the shitter on the left?

Happy feet,next winter

Those wired mirrors are cool - they gently heat the back of the mirror so that it doesn't steam up when shaving

Originally Posted by 308

Those wired mirrors are cool - they gently heat the back of the mirror so that it doesn't steam up when shaving

Yeah, the controller has ports for mirror and towel rail

Hey Madjon throw in another floor sensor. They cost f all but they can and do fail. I put two in on all my jobs so at lest if one goes west I've got the back up. Better that than go looking to add one after or worse lift tiles to replace old one.

Cutting tiles for dry fit
Now what went where?

Originally Posted by madjon_

Cutting tiles for dry fitAttachment 59740
Now what went where?

Looking great! Did you do the hexagons on the floor yourself?

Originally Posted by square1

Looking great! Did you do the hexagons on the floor yourself?

Yes,they have been grouted too

Originally Posted by madjon_

Yes,they have been grouted too

Nice one. My girlfriend picked little wee hexagons for the floor in our bathroom, I did all of the rest of the tiling around the house but too nervous to tackle a floor of little hexagons. Were they difficult to space correctly?

Originally Posted by square1

Were they difficult to space correctly?

There is some variation

Question, are you installing a shower screen hate a wet toilet seat and roll

That man deserves a wai..DB

Originally Posted by Sideshow

Question, are you installing a shower screen hate a wet toilet seat and roll

Hinged screen will follow the grout line between octos and tiles