Thread: h&r handi repair

ok so the time has come to replace the firing pin on the handi rifle has any one done one? im confident that i can do it but have only realy found info on doing the trigger tune. its a good article but doesnt realy go into pin replacement which by the look of it is just a case of removing 1 more pin. any one got any tips or things to be wary of thanks

If its anything like a rossi you may want to make up some slave pins to hold everything together while assembleing it.
I cut the butt off of a couple of drill bits to hold it all together then the actual pin pushes it out as you put it in.

thanks for that one thing i read mentioned slave pins

thanks muzza its already had the trigger done on it. that answers a question about what i wanted to know i was hoping not to strip the whole rifle to get the firing pin out but it looks like i have to. its a nice rifle for what it is