GSP, i'm pretty sure his 7 mm Harvey magnum was the little known 6.5 Rem magnum necked up to 7mm. He was early onto the .284 Win when he re-barrelled a medium length BSA with the tube and chamber. ...
Liked On: 25-03-2024, 03:24 PM
GSP, i'm pretty sure his 7 mm Harvey magnum was the little known 6.5 Rem magnum necked up to 7mm. He was early onto the .284 Win when he re-barrelled a medium length BSA with the tube and chamber. ...
Liked On: 25-03-2024, 08:02 AM
There good, used to use both when doing triathlons and marathons. Use for hunting when doing the hills with packs. Sent from my iPhone using Tapatalk
Liked On: 25-03-2024, 06:27 AM
I use the 120 BTs in my .260 and Swede. I have found they penetrate well and often exit at close to medium ranges unless you hit major bones, (ranges up to 200m). Observations based on fallow deer...
Liked On: 18-03-2024, 11:35 AM
I’d just run 8x57, 6mm rem or .257 Rob. Brass through a FL die if I couldn’t get new brass. Sent from my iPhone using Tapatalk
Liked On: 18-03-2024, 09:27 AM
I use the 120 BTs in my .260 and Swede. I have found they penetrate well and often exit at close to medium ranges unless you hit major bones, (ranges up to 200m). Observations based on fallow deer...
Liked On: 18-03-2024, 07:28 AM
I use the 120 BTs in my .260 and Swede. I have found they penetrate well and often exit at close to medium ranges unless you hit major bones, (ranges up to 200m). Observations based on fallow deer...
Liked On: 18-03-2024, 05:49 AM
I’d just run 8x57, 6mm rem or .257 Rob. Brass through a FL die if I couldn’t get new brass. Sent from my iPhone using Tapatalk
Liked On: 18-03-2024, 05:01 AM
Makka, I have a Robert’s on the std Mauser. Years ago when working on a property in western QLD and old bloke turned up with and original kurz mouser in .250/3000. It was a slick piece. The memory...
Liked On: 17-03-2024, 09:14 PM
Makka, I have a Robert’s on the std Mauser. Years ago when working on a property in western QLD and old bloke turned up with and original kurz mouser in .250/3000. It was a slick piece. The memory...
Liked On: 17-03-2024, 08:30 PM
Data for the 303/.25 is sorted by action type. Rear locker/SMLE and P14 / front locker. Velocities for front lockers is similar to .25 savage. 87 at 3000 fps, 100s at 2800-2950 fps. Powders in...
Liked On: 16-03-2024, 09:19 PM
Not dirt cheap but value priced are the Penn Prevail 2’s. Pick your rod based on length, cast wt and line wt required. About 200 ish. Less on sale at the big stores. For more twice that and Sako...
Liked On: 16-03-2024, 05:44 AM
Carbine, for socks look at the NZ sock company, Ashburton I think. Good products and fair prices. In regards to new boots, with the padding and build in new boots I like to start with light...
Liked On: 08-03-2024, 08:34 AM
Carbine, for socks look at the NZ sock company, Ashburton I think. Good products and fair prices. In regards to new boots, with the padding and build in new boots I like to start with light...
Liked On: 08-03-2024, 07:50 AM
Carbine, for socks look at the NZ sock company, Ashburton I think. Good products and fair prices. In regards to new boots, with the padding and build in new boots I like to start with light...
Liked On: 08-03-2024, 03:30 AM