https://www.nzhuntingandshooting.co.nz/f12/223-deer-64884/
Liked On: 30-03-2024, 11:37 AM
The appearance of birdsong levels is not an accurate or reliable measure of mortality or bycatch. It is anecdotal evidence at best. There is credible independant science around the by catch and...
Liked On: 01-07-2018, 04:07 PM
Don't you have some panel damage to fix? Sent from my F5321 using Tapatalk
Liked On: 11-04-2018, 10:31 PM
When you buy a nightforce you don't need the warranty! Sent from my SM-G950F using Tapatalk
Liked On: 22-12-2017, 11:19 AM
Yes, but you can get the same barrelled action in the hogue stock that is a grand for the scoped package and still only weighs 50g more bare. It's called the ranchland. They are not the heavy...
Liked On: 26-09-2017, 07:05 AM
Going by your last two posts theres a good chance you're right.
Liked On: 04-07-2017, 08:16 AM
Ignorant, stupid comment.
Liked On: 04-07-2017, 08:16 AM
Is it simple enough to get bits welded to a used alloy boat? Am thinking adding high sides to a pontoon type scenario? Any engineering or metallurgical issues?
Liked On: 11-05-2017, 09:11 PM
Highly compressed photo. Not me shooting obviously. 63933 Leica Q
Liked On: 01-04-2017, 12:36 PM
Where does this gravy train stop? Literally. I would like to get in on the action please. It sounds like a very good investment. Would the "gravy guru's"here please point us in the right...
Liked On: 23-02-2017, 07:49 AM
I agree with all but the last sentence.
Liked On: 17-02-2017, 09:58 PM
Bloody 1080 threads You can see why it goes bad a, two guys I have a lot a respect for Maca49 and Tahr both battling it out with reasonably sound arguments either way and no ground given. Sent...
Liked On: 17-02-2017, 08:32 PM
Can't go past the Nightforce 2.5-10x42 !!
Liked On: 08-02-2017, 09:39 PM
Update. Stug kindly offered to look at and fix my stock. The fix appears to be stronger than original and I’m sure it will be OK. I also had the chance to cast my eye over some of his work....
Liked On: 12-12-2016, 04:21 PM
Did it on my old GQ with a turbo (runs pretty decent crankcase pressure) I just used heater core tube down to the chassis rail... She'll never rust on that side, and you can always alternate to the...
Liked On: 16-11-2016, 07:35 AM