MGNZ
Member

30 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   MGNZ liked post by johnd On thread : DIY Induction Annealer

   Here is my annealer using MGNZ's shield design. I have mounted it all in an ACM case I designed. The blue LED you see when the annealer is running is taken directly from the ZVS board to give a...

   Liked On: 08-07-2020, 12:25 PM

2. 
   MGNZ liked post by gadgetman On thread : Gadgetmans Induction Annealer

   I've been gathering together bits to make a couple of annealing and with the weather improving it was time to start work. I gave up looking for a source of plastic for the trapdoor so went the DIY...

   Liked On: 04-11-2018, 07:41 PM

3. 
   MGNZ liked post by john m On thread : The Lever Aficionados Thread

   Some other ones 93289 93290 93291 93292

   Liked On: 04-11-2018, 07:01 PM

4. 
   MGNZ liked post by tanqueray On thread : The Lever Aficionados Thread

   There’s been threads for wood/blued firearms, light weight firearms etc etc. I love seeing photos of other people’s leverguns, so post your pics here! Here are my current two; I’ve had...

   Liked On: 04-11-2018, 07:01 PM

5. 
   MGNZ liked post by Beavis On thread : Salt Bath Annealing

   Just got my kit together. Will be interesting to see how it goes. 90534

   Liked On: 06-07-2018, 03:12 PM

6. 
   MGNZ liked post by Russian 22. On thread : AR's - the usual suspects??

   Cheapest is spears. It's ok. Best one is ail or something. But they're 250 bucks Best that's affordable is the katipo one. Sent from my TA-1024 using Tapatalk

   Liked On: 25-06-2018, 10:12 PM

7. 
   MGNZ liked post by Chilli_Dog On thread : 3D print extended Tikka T3 Magazine

   When you get your model sorted have a look at getting them printed in glass filled nylon (SLS) it is much stronger than the FDM type prints

   Liked On: 09-06-2018, 10:33 AM

8. 
   MGNZ liked post by Puffin On thread : Target Camera Revisited

   It’s been a couple of years since 7mmSaum and NZFUBZ presented details of their Target Camera systems: https://www.nzhuntingandshooting.co.nz/f31/target-cam-20703/...

   Liked On: 01-05-2018, 10:31 AM

9. 
   MGNZ liked post by duckdog On thread : Powder equivalents, AR2213sc and H4831sc.

   Thankyou for your recent enquiry with regard to reloading using ADI Sporting powders. Some ADI propellants are sold in the US by the Hodgdon Powder Company, including AR2208 which is sold as...

   Liked On: 06-01-2018, 01:32 PM

10. 
    MGNZ liked post by Mathias On thread : Case hardening a tikka recoil lug

    I'd imagine with a good bedding job, there would be less movement on the recoil lug and your problem may well be fixed.

    Liked On: 24-12-2017, 04:23 PM

11. 
    MGNZ liked post by Kiwi Greg On thread : Case hardening a tikka recoil lug

    If it gets harder than the action, it will flog that out instead of the lug ??? You can turn it around & end for end before it needs replacing, if it ever does :)

    Liked On: 24-12-2017, 04:23 PM

12. 
    MGNZ liked post by Micky Duck On thread : General approach to powder selection for a new load

    my .270 has never been a fussy tart to feed and will put any and all loads into playing card sized combined group at a hundy........whoopdeedo says you...well for bush stalking it never mattered what...

    Liked On: 28-11-2017, 10:17 AM

13. 
    MGNZ liked post by r87mm On thread : General approach to powder selection for a new load

    I agree with what's been said. I look for the top three powders in the book with good case fill and speed and then check the sites on the net to verify if others are using the same powders with good...

    Liked On: 28-11-2017, 10:17 AM

14. 
    MGNZ liked post by johnd On thread : General approach to powder selection for a new load

    As you have rightly noted there is a great deal of variety in reloading ....even in one caliber you have the wide choice projectile weight / style. It can be annoying when starting out or changing to...

    Liked On: 28-11-2017, 10:17 AM

15. 
    MGNZ liked post by On thread : General approach to powder selection for a new load

    you will probably find accurate loads arent always the fastest loads if you want fast you might have to sacrifice accuracy and vice versa

    Liked On: 28-11-2017, 10:17 AM

Page 1 of 2 12 Last

• Jump to page: