NZ_noddy
Member

100 Likes

Page 1 of 7 1234567 Last

• Jump to page:

1. 
   dannyb liked post by NZ_noddy On thread : Jard Trigger for Howa Mini

   Anyone using one of these in their rifle? Would be pleased to have your thoughts. Have done the spring mod & could be better I feel.

   Liked On: 17-01-2024, 03:00 PM

2. 
   blip liked post by NZ_noddy On thread : Reloading k brass

   K Hornets are more prone to neck splitting from my experience. Annealing after every firing certainly prolongs the neck life.

   Liked On: 14-12-2023, 10:29 PM

3. 
   dannyb liked post by NZ_noddy On thread : rings or rail for Howa 1500

   Never had an issue with many sets of Talley rings/bases over the years.

   Liked On: 12-09-2023, 04:02 PM

4. 
   Hermitage liked post by NZ_noddy On thread : Dayattherange Flyswatter Challenge

   Finally got to the range this morning to give this a whirl. Bloody cold, maybe 1deg but at least no wind. Might look easy but it aint! I'm going to retry this on a warmer day. Both shot at 50m....

   Liked On: 23-08-2023, 05:11 PM

5. 
   NakiNewbie liked post by NZ_noddy On thread : Helping to collect and send some gear from Christchurch to the NI

   Can do that I expect. PM me.

   Liked On: 20-08-2023, 07:58 PM

6. 
   dannyb liked post by NZ_noddy On thread : Magnetospeed mounts

   Fairly easy to mod the original Magneto to work with suppressors. I've had zero issues with mine in modded format. I still remove it to shoot for groups only because the poi is slighly changed...

   Liked On: 20-08-2023, 07:15 PM

7. 
   Moa Hunter liked post by NZ_noddy On thread : Dayattherange Flyswatter Challenge

   Finally got to the range this morning to give this a whirl. Bloody cold, maybe 1deg but at least no wind. Might look easy but it aint! I'm going to retry this on a warmer day. Both shot at 50m....

   Liked On: 11-08-2023, 09:24 PM

8. 
   7mmsaum liked post by NZ_noddy On thread : Dayattherange Flyswatter Challenge

   You don't have that long...............

   Liked On: 11-08-2023, 06:10 PM

9. 
   Ross Nolan liked post by NZ_noddy On thread : Dayattherange Flyswatter Challenge

   Finally got to the range this morning to give this a whirl. Bloody cold, maybe 1deg but at least no wind. Might look easy but it aint! I'm going to retry this on a warmer day. Both shot at 50m....

   Liked On: 11-08-2023, 03:19 PM

10. 
    Micky Duck liked post by NZ_noddy On thread : Barrel and serial number engraving Christchurch ?

    Got mine done by a bloke in the mall. No worries at all, just had to explain what size etc. I wanted the lettering. After all a barrel is just a piece of pipe............

    Liked On: 08-05-2023, 05:59 PM

11. 
    mudgripz liked post by NZ_noddy On thread : Fun with 22s - wee ammo test

    Further to post above, I was getting really excited about this group till I walked up to the target and spotted the one hiding in the black! Still pretty happy with both my second Lithgow and the...

    Liked On: 20-03-2023, 06:23 PM

12. 
    Moa Hunter liked post by NZ_noddy On thread : Fun with 22s - wee ammo test

    Further to post above, I was getting really excited about this group till I walked up to the target and spotted the one hiding in the black! Still pretty happy with both my second Lithgow and the...

    Liked On: 20-03-2023, 12:53 PM

13. 
    Micky Duck liked post by NZ_noddy On thread : Advice on a new pipe for my 222

    Have a new CZ barrel chambered in .223 but unsure if the barrel threads are the same? Maybe you can check and PM if it's of interest.

    Liked On: 11-03-2023, 01:25 PM

14. 
    charliehorse liked post by NZ_noddy On thread : Advice on a new pipe for my 222

    Have a new CZ barrel chambered in .223 but unsure if the barrel threads are the same? Maybe you can check and PM if it's of interest.

    Liked On: 10-03-2023, 06:03 PM

15. 
    csmiffy liked post by NZ_noddy On thread : The "Gear I love" thread - An open list for good gear

    Some of us probably haven't got that long to wait..................

    Liked On: 20-11-2022, 07:33 AM

Page 1 of 7 1234567 Last

• Jump to page: