Almost certainly shelley.raskin@icloud.com send me a pic
Liked On: 28-07-2023, 10:49 PM
A few of yiu know that I make knives and sheaths and also sharpen knives and have various different methods of sharpening, until recently I sharpened convex edges on a slightly slack belt on my 2x 48...
Liked On: 28-07-2023, 10:49 PM
Side effect of a semi lockdown is that I manage to find some time to do some more work on some knives I have been trying to work on, this one is now almost done, 01 blade, brass guard and pommel,...
Liked On: 31-12-2022, 08:55 AM
Benchmade are ok, there stuff is expensive because they are made and assembled in the states, so they have to pay actual wages, as for steel type they run the full gamut of mostly to full stainless...
Liked On: 08-04-2022, 08:54 PM
Looks good, I usually use linseed oil followed by boiled linseed oil. Now you just need to put it through its paces!
Liked On: 16-10-2021, 08:01 PM
Best of luck with the move, at least its close to Masterton so easy to get bits and bobs from artisan supplies, and pick your self up a Tuatahi as well!
Liked On: 27-09-2021, 04:38 PM
Latest, still cooking 176992
Liked On: 31-08-2021, 10:13 AM
Latest, still cooking 176992
Liked On: 30-08-2021, 09:56 PM
Latest, still cooking 176992
Liked On: 30-08-2021, 08:12 PM
Latest, still cooking 176992
Liked On: 30-08-2021, 04:06 PM
I have the same hatchet head, it can get sharp but honestly don’t like it as much as my other axes. Step one: go and mug a big bottle of white vinegar, put the axe head in a dish, even chop up a 2L...
Liked On: 05-08-2021, 09:27 PM
I have the same hatchet head, it can get sharp but honestly don’t like it as much as my other axes. Step one: go and mug a big bottle of white vinegar, put the axe head in a dish, even chop up a 2L...
Liked On: 05-08-2021, 01:23 PM
You might consider getting a decent double sided diamond stone, dmt is a good brand, carbatec sell them, will set you back a couple of hundred for a good 8 inch one but it will never dish or crack,...
Liked On: 10-07-2021, 10:08 PM
You might consider getting a decent double sided diamond stone, dmt is a good brand, carbatec sell them, will set you back a couple of hundred for a good 8 inch one but it will never dish or crack,...
Liked On: 10-07-2021, 09:10 PM
My next few will be made from this: 170352 1225 mm of nitrov, my first foray into stainless steel, not a super steel, but not super steel prices either, still a very good steel so should be...
Liked On: 17-06-2021, 06:22 PM