Swordfish Bill

[2Quack]

Here’s the first Sword Bill I’ve ever done, have done a few Marlin Bills but this was next level haha



Been drying and seeping oil for awhile so it was time for some serious sanding then a nice clear coat and a binding, should do the trick

[Micky Duck]

looks great as a burgler basher.......better hide it from the Mrs if you decide night out at pub is in order.

[2Quack]

Yeah these things are seriously solid you’d split someone’s head if ya sconed em with it, it’s residing at a mates house so he’ll have to avoid getting the bash after a night out ........

[Shearer]

How long did it take to stop the oil seeping from it @2Quack? I've had one for 20+ years now and it still seems very oily. Have heard you can soak them in formaldehyde or something to leach the oil out?
Nice effect the sanding and binding.

[jakewire]

Looks bloody good.

[2Quack]

Shearer, This one had been in a freezer for about 2 years then in a garage for about 3
I found once you got stuck in sanding with an orbital sander and 80 grit, which is painfully slow due to the dried skin and oil, the bone itself was quite dry and then sanded nicely with 800 then 1200. Getting through the gunk on the surface was the hardest. Formaldehyde would work I’d say but 20 years aging would be suffice,give it a sand I say