Anyone have one lying around?
I have done a bit of Google but not much out there. Ones I have found will not ship to NZ
Anything considered. I have someone who will make them if I can track down a mold.😆
Sent from my SM-G935F using Tapatalk
Printable View
Anyone have one lying around?
I have done a bit of Google but not much out there. Ones I have found will not ship to NZ
Anything considered. I have someone who will make them if I can track down a mold.😆
Sent from my SM-G935F using Tapatalk
I have a new in the box Lyman mould #401633 200gr BB TRC never used it got with a bunch of moulds I bought as a job lot, interested in selling at the right price.
Can you post a pic please shooternzQuote:
Originally Posted by shooternz
I am definitely interested.😆
Sent from my SM-G935F using Tapatalk
Ive got a .40 mold of some sort that came in a bunch of stuff I bought a while ago. Not sure if it's a 200 or 180gr though.
Thanks Oz but I just bought Shooternz's one.Quote:
Originally Posted by Ozzy
Should have listened to @nzfubz when he told me to go to 200's ages ago.
I tried some Rusa 200 grain @900 fps and they shot softer and as accurate to what I have been using.
Using a grain less powder and easily reach PF.
Sent from my SM-G935F using Tapatalk
Yeah the 200s are the way to go, they are all I've ever run.Quote:
Originally Posted by R93
If you want a second mold you're welcome to it, as I'm never going to use it.
Awesome. I will remind you when you head over these ways.Quote:
Originally Posted by Ozzy
I will save you some whitebait or a few backsteaks.
Cheers fulla😆
Sent from my SM-G935F using Tapatalk
You buying the new toy your fondled in Wanganui? @R93
Still thinking about it to be honest. He doesn't seem that keen to sell yet.Quote:
Originally Posted by nzfubz
I will buy it if he does decide too.
My one turned out pretty good with the new thumb rest. Lightened trigger and recoil spring.
Like you said it does take a bit to get used to. I got a bit of slide rash on my strong hand thumb while getting used to the rest.😆
https://uploads.tapatalk-cdn.com/201...44c78163dd.jpg
Sent from my SM-G935F using Tapatalk
Are you sure the rash/worn bit, was from the gun? :)
And are you going to be making the 200gns for everyone? I may have some lead here - and it's either going to be sinkers (me) or bullets (someone else doing it).....
Send it over and I will get some made for you.Quote:
Originally Posted by Beaker
My mate makes my 180 gr ones now. They shoot really well.
You will need to see if you want to use cast bullets thru your gun.
Mine doesn't foul at all with them.
Did you get onto your guy about that other thing?
Sent from my SM-G935F using Tapatalk
Hey guys I after one of these again.
The one I bought doesn't cast properly so no go with that one.
If you have one lying around let me know.
Cheers.
Sent from my SM-G935F using Tapatalk
What is it doing wrong?
It is leaving creases in the cast bullets.Quote:
Originally Posted by marky123
Also had a rust mark that when cleaned out left pitting and so another blemish.
We are going to smoke it tonite and see if that makes any difference.
Sent from my SM-G935F using Tapatalk
were you getting it hot enough and is there zinc in your alloy?
Na. I am not doing it.
Have a mate that I am sure cast bullets for Jesse James making them for me😆
He only shoots cast bullets, and thru around 20 different pistols and long guns. Hes a fanatic.
He only uses lead that has no chance of contamination.
My mate did 100 tonite. They honestly look fine to me, but he reckons they're not as good as they are supposed to be.
I will shoot them and see if we will need to replace the mold.
I personally think he is being a bit of a perfectionist.😆
But I am not doing the work.
Sent from my SM-G935F using Tapatalk
It's true then, hoki folk will smoke anything. :)Quote:
Originally Posted by R93
Everything except pole😆Quote:
Originally Posted by Beaker
Can't answer for @gimp tho as he is new to our little town😆
Sent from my SM-G935F using Tapatalk