Printable View
I’m loading for an old rifle of mine and in my notes it looks like 43.6 of 2206h and fed 210s it rings a bell but not for certain and my notes on this particular rifle have a big smudge on them . Is anyone loading similar it was very accurate in this rifle just wanting to double check that doesn’t sound to hot don’t want to do a ladder if I don’t have to it looks like a 3 it was definitely 4 something .6
308?....
If 308
Hornady 10th gives 43.3 of H4895 which is ADI 2206H as max load. Same for IMR 4895.
Yes sorry .308 thanks a lot gents
I loaded 43.5r 2206h behind the 168 ELD-M in a .308 I had. So looks like you’re in the ballpark. It was a max load in my gun with Federal brass which was a bit soft.
Yip iv found a photo of the original load d target and it is 43.6 2206h fed 210s and Winchester brass cheers mate
Good load, 168 ELD-M with 43 grains 2206h cci primers and Hornady brass in my Howa 308.
I think that's one of Nathan Foster's pet loads for 308 43 grains at 2.75" coal.
Now that's sorted gor Kelton does anyone know which bullets the Hornady 168gn Z-Max are?
I'm using some with a similar load for club events. I saw one break up on a pig shoulder at close range but I have a heap of these Z-Max 168gn 500ish
As far as I remember they have the little green poly tip? I don’t no what their intention was maybe feeding the fools day preppers I do remember when they were advertised they weren’t for hunting
The 168 z max is the same as the a-max with a different coloured tip.
Nice I remember when they were all over the market
Yes, making them cheap or affordable.Quote:
Originally Posted by Kelton
They will be OK for club shooting, better than no shooting.
I'm not a fan of the Zombie Marketing stuff but I did buy them in .22 and .30.