Thread: .22-243 resizing

So one for all you guru's out there...

I thinking of a wee little .22-243 build, now is it just a simple case of purchasing some .243 brass and throwing them through some.22-243 dies to size them or is is a tad more complicated than that?

Feedback appreciated.

Cheers Craig

Originally Posted by Double Shot

So one for all you guru's out there...

I thinking of a wee little .22-243 build, now is it just a simple case of purchasing some .243 brass and throwing them through some.22-243 dies to size them or is is a tad more complicated than that?

Feedback appreciated.

Cheers Craig

Simple as, you don't really need 22-243 dies, a 22 seating die, 243 FL die & 22 Neck die will do the job nicely.

Who ever builds it for you should be able to hook you up.

Originally Posted by Double Shot

So one for all you guru's out there...

I thinking of a wee little .22-243 build, now is it just a simple case of purchasing some .243 brass and throwing them through some.22-243 dies to size them or is is a tad more complicated than that?

Feedback appreciated.

Cheers Craig

If you have the CH4D dies that Gunworks sells then yeah, straight through the die and shoot it!

Originally Posted by 300_BLK

If you have the CH4D dies that Gunworks sells then yeah, straight through the die and shoot it!

The ones I got quite a few years ago now were pretty crap to be fair, the ones I got for the 510 wsm recently weren't much better.....

I've got a set of CH4D's you can borrow anytime.

Cool, wasn't sure it'd be that simple having never done that sort of loading.

The CH4D dies are of interest, I have them for my .300 Blaser, will be getting a work out soon enough on that.

Now just to source the right donar rifle...