Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Delta Darkness


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 16
Like Tree5Likes

Thread: 2213sc in 6.5x55?

  1. #1
    Member
    Join Date
    Mar 2012
    Location
    Naracoorte South Australia/From South Canterbury
    Posts
    382

    2213sc in 6.5x55?

    Hi theres currently a major shortage of 2209 in Australia and I'm getting low. Is anybody running 2213sc in their 6.5x55 with 120 and 140 gr bullets?

    Sent from my SM-A515F using Tapatalk

  2. #2
    Member Timmay's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    2,674
    A quick and dirty calculation suggests it could work
    Name:  Capture.PNG
Views: 339
Size:  109.9 KB
    Tuidog likes this.

  3. #3
    Member
    Join Date
    Mar 2012
    Location
    Naracoorte South Australia/From South Canterbury
    Posts
    382
    What is predicted velocity with 22inch barrel?
    Rifle is a Titan 6. current load 140 eldm with 45.5 2209 wlrm primer 2870fps

  4. #4
    Member Timmay's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    2,674
    ah yeah, thats showing a 16.5" with 22" about 2750 (this will change depending on what 140gr you use.)
    Tuidog likes this.

  5. #5
    Member
    Join Date
    May 2020
    Location
    Palmerston North
    Posts
    252
    I did a comparison of 2209 and 2213sc with 129gr bullets. It may be of interest to you:
    https://www.nzhuntingandshooting.co....ml#post1062511
    Tuidog likes this.

  6. #6
    Member
    Join Date
    Mar 2012
    Location
    Naracoorte South Australia/From South Canterbury
    Posts
    382
    Quote Originally Posted by Magnetite View Post
    I did a comparison of 2209 and 2213sc with 129gr bullets. It may be of interest to you:
    https://www.nzhuntingandshooting.co....ml#post1062511
    Thankyou Sir

    Sent from my SM-A515F using Tapatalk

  7. #7
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    I've never used it , only 2209 and N560 however have a mate who uses it with the 129gr Hornady. shoots very well.
    Quis custodiet ipsos custodes?

  8. #8
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    Quote Originally Posted by Tuidog View Post
    What is predicted velocity with 22inch barrel?
    Rifle is a Titan 6. current load 140 eldm with 45.5 2209 wlrm primer 2870fps
    I use 2213sc in an F class rifle 30" barrel with Lapua 139 match bullets velocity was 2927fps in my Sako 75 velocity 2560fps with 46.6 grains
    with much better accuracy than 2209 it is not maximin it my rifles but work up to it as usual, I loaded higher to 2970fps but the accuracy dropped off.
    Tuidog likes this.

  9. #9
    Bos
    Bos is offline
    Member
    Join Date
    May 2017
    Location
    Blenheim
    Posts
    929
    Loaded 47 Gr 2213 with a 143 gr ELD X in my mates Tikka T3
    Chronyed at 2650 Av FPS.

  10. #10
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    3,917
    My load is 49 grains of 2213 SC with 143 gr ELD X in a 20 inch Tikka, chrono at 2750 fps while doing load development but recently chrono at just over 2600 fps. I checked the drop chart and it said at 2700 fps that would drop 21 inches at 400 yds so I tried it and actual drop was 22 inches. This load has shot a one hole 3 shot group, mostly .5 to an inch depending on my shooting. This load is about max in my rifle treat with caution.

  11. #11
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    3,917
    Just rechecked the drop chart and the drop was projected at 21 . 9 inches, not 21 inches, so the actual drop of 22 inches sort of validates that load at 2700 fps and a 200 yards zero.

  12. #12
    Member mucko's Avatar
    Join Date
    May 2012
    Location
    Tauranga
    Posts
    12,624
    Quote Originally Posted by Tuidog View Post
    Hi theres currently a major shortage of 2209 in Australia and I'm getting low. Is anybody running 2213sc in their 6.5x55 with 120 and 140 gr bullets?

    Sent from my SM-A515F using Tapatalk
    adi is showing 2586ft/sc in 24" at 47gr 2213sc you might see around 2500 with 22"
    Muckos Shooting accessories and engineering https://www.facebook.com/aimnzengineering/

  13. #13
    Member mucko's Avatar
    Join Date
    May 2012
    Location
    Tauranga
    Posts
    12,624
    what about reloader 19?
    Muckos Shooting accessories and engineering https://www.facebook.com/aimnzengineering/

  14. #14
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    Quote Originally Posted by mucko View Post
    what about reloader 19?
    Just buy a .264 Win Mag

  15. #15
    Member
    Join Date
    May 2020
    Location
    Palmerston North
    Posts
    252
    I did some seating depth testing with 2213sc and 129gr projectiles. It looks like you will need to adjust it between 2209 and 2213sc. Initially it looks like 2213sc noticeably more accurate. I hope to do a direct comparison in a week or so.
    Tuidog likes this.

 

 

Similar Threads

  1. 7mm rem 154sst 2213sc
    By Link in forum Reloading and Ballistics
    Replies: 8
    Last Post: 27-07-2019, 09:29 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!