If it shoots like that is there any point?? Thats a better group than most custom guns can do
Printable View
Yep you can likely improve on that.
My M7 223 with same bullet with 25.2gr does this. But only after fine tuning seating depth.
https://uploads.tapatalk-cdn.com/202...fe25fbc430.jpg
Sent from my SM-G930P using Tapatalk
When i had my "stolen ar" i tried carefully reloading the most accurate load right down to carefully weight sorting brass, all same head stamp, all projectiles weight sorted then sorted those by bearing surface length etc etc Vs that loaded from range pickup brass thru a progressive press. There was not enough difference in the groups as while the carefully loaded stuff shot marginally better the steel plate still were hit at required distances. Just was not worth the faffing about and the time taken (in my case)
I have some loaded up along side some 55gr and 63gr pills ever so kindly lent to me by 7mmsaum and seventenths... Haven't had a bloody chance to get to the range yet tho.
I have used 2208 / 2206h with good accuracy, In my Savage 12. The reason I'm using a faster powder Vihtavuori N130 is because of a short barrel 20 inches, with a can on. Trying to get powder burnt in the barrel, so as to prolong the life of the Suppressor. Savage M10 Lite weight rig set for hunting. Attachment 150501
Tried mine today on something other than paper.
They work.
Attachment 150670
Attachment 150671
mate uses 2206h in his load with em, shot very well out of his ar (rip) and pretty mediocre but acceptable out of both of his 2 bolt 223's, great hunting load as far as a 223 is concerned