Looking to do a few loads for my old man, was thinking about getting the 95gr hornady sst and 2208.
Anyone have a good reliable load?
Printable View
Looking to do a few loads for my old man, was thinking about getting the 95gr hornady sst and 2208.
Anyone have a good reliable load?
How long is his barrel?
I've just done some load development for my Dad's model 7 with 18.5" barrel.
Wanted to run 100g if possible, and wanted to get keep reasonable velocity from the short barrel.
Ended up using 7828ssc. 47gr shoots well with 95 SST and 100 sgk's.
http://youtu.be/FpVPrzeRfqE
Here's my 74 yr old Dad shooting it.
Attachment 56715
If yours has a standard length barrel 2209 is probably the better powder to use.
I got great results with 95gn sst's and 42gn of 2209 out of my Tikka.
Mag length or seated out? CheersQuote:
Originally Posted by septic
Whanganui,
I used a load of 95 grain SST and 42 grains of 2209 out of my Brno with a 23 inch barrel.
With the bullets just off touching the lands this load chronographed 3020 fps, and shot three shot groups into an inch at 100 m.
hey mate cheers for the info!! Why did you opt for 2209 and not 2208
37 gr 2208 and 87 grn Hornady's.
85g Sierra HPBT over 41g 2209 works for me.
47.2g 2217 and 100 Sierra SP also works.
Buy him some decent muffs.Quote:
Originally Posted by GWH
All depends on the rifle. I'm working on a load for my rem 700 at moment using 87g vmaxesQuote:
Originally Posted by kiwijames
Funny you should mention that, I had him on about his very old school muffs. I had two pair of good muffs with me but he wanted to use his.Quote:
Originally Posted by tetawa
He's deaf and has hearing aids already, use to be a competitive skeet shooter (shit loads of shots).
Sent from my SM-G900I using Tapatalk
It looks to be a very nice rifle.
The books told me I could get a higher velocity with the 2209 than 2208, and plus I happened to have already have some. But you could make a decent load with 2208 if that's all you got.Quote:
Originally Posted by Whanganui
The max load from ADI for 2208 and a 95 grain bullet is 35 grains for 2996 fps, depending on your rifle.
used 45 09 with 100gn sierra 2900 , 46 09 85gn 3000 in the same older model 7 now use 06h for 3000 87gn vmax 16 in barrell
85g Sierra HPBT with 44.4 2209, a number of us use this load to devasting effect, also produces great velocity and impact shock....
Lapua brass fed 210 43gr AR2209 95gr targex cosistent 5 shot's .5'' or better
Same brass and primers 44.5gr AR2209 85hpbt sierra cosistent 5 shot's .75'' or better
There's nothing wrong with those folding Peltors, long as they're in good conditionQuote:
Originally Posted by GWH
Was that 2900 with the 100g in a 16" barrel?Quote:
Originally Posted by Huk
Mag lengthQuote:
Originally Posted by mayfly
No mate when it was 18.5 as originalQuote:
Originally Posted by GWH
Ok sweet, I'm getting 2900 with 100g in dad's 18.5" as well.Quote:
Originally Posted by Huk
Sent from my SM-G900I using Tapatalk
Great thats a nice original m7 you got for him bet hes happy :thumbsup:
