Printable View
Hi Guys
I am developing loads for my P17 25-06, I have access to ADI powders and have AR 2208 and AR 2209.
So far I have a 117gr Sierra pro-hunter load and a 90gr Sierra Game King load.
I have just ordered some Hornady 75gr V-max to have a play with.
Any data for loads or info about the cartridge would be appreciated or just to chat with others who shoot the 25-06 Remington.
cheers Land Rover
75 grain projectile AR2209 54 grains of powder 3,400fps max load 59 grains 3,700fps
75 grain projectile AR2208 46 grains of powder 3,455fps max load 49.7grains 3,660fps
pick another caliber as well as truck
Switch to 2206H for your 75gn loads (my max 75 Vmax load is 49gn to get an averaged 3746fps ), solid velocity gains over 08. 2209 will be great for the rest, am getting averaged 3152fps with 54gn 2209 for 117 Sierra Prohunters and my SST 117's are getting 3220fps averaged, same load, mine are a little warm though. Been loading for 2506 and .257WBY for over 10 yrs and have all sorts of data, including terminal performance of all sorts of different projectiles, some work better than others, gimmie a shout if you have anything specific. Velocity means everything to a 2506, get as much as you can without risking your action! What is your barrel length?Quote:
Originally Posted by Land Rover
I always start here.
http://www.adi-powders.com.au/handlo...uide/rifle.asp
Thanks for the info, barrel length 25 inches. Thanks for the data. I see your 117gr prohunter 2209 load is 6.3 gr above ADI's max of 47.7, I am using 47gr 2209 at the moment. Not sure of the velocity though. I've only been reloading a couple of years, and still cautious when approaching max loads. My primers don't show any pressure signs but 6 grains over seems a lot extra? Do you have a suppressor on any of yours? I haven't yet but am toying with the idea. Not for recoil but to save my ears when bombing up Goats and to keep it quiet in the next gully.Quote:
Originally Posted by 257weatherby
Thanks for your wisdom Smiddy, have you owned either?Quote:
Originally Posted by Smiddy
I use
-117gr Gamekings with 52gr 2213sc
- 110gr hornady interbonds (have only done load havn't used hunting yet) with 51gr 2213sc
- 75gr vmax with 58gr 2213sc these are awesome for use on birds. Can't wait to get a hare or rabbit.
Sent from my iPhone using Tapatalk
Also played with the 117gr gamekings with trail boss powder was real quite had the kick of a 22 but 4inch drop over 50m. Pritty useless but made some just because I could.
Sent from my iPhone using Tapatalk
Nah...... I have an educationQuote:
Originally Posted by Land Rover
My action is a Mk5 Wby,very strong! with a P17, you would not look to go too far in the red zone with your loads, but as a general guide, one of the indicators I look for is the extractor mark rather than primers, they can indicate over pressure when there is none (unless they are falling out the pocket of course!) Without a strain gauge of my own, it is a little subective, but I use the ADI max as a starting point and go up or down from there looking for the best blend of outright velocity and accuracy - but you really do need to chrony your loads. 25" is a good length for 2506, any shorter is a complete waste, might as well be running a .257 Roberts!. I have a suppressor but seldom use it-(earmuffs on the range) but would if I were bombing up as you are.Quote:
Originally Posted by Land Rover
[QUOTE=307win;218280]I use
-117gr Gamekings with 52gr 2213sc
- 110gr hornady interbonds (have only done load havn't used hunting yet) with 51gr 2213sc
- 75gr vmax with 58gr 2213sc these are awesome for use on birds. Can't wait to get a hare or rabbit.
Am assuming the 110 Interbond is for inside 200m and the Gameking for outside that? I use the 110 Accubond and 117 Prohunter/SST that way, although the Prohunter doesn't blow up at close range like the gameking on a heavier annimal does. The 75 Vmax is awsome destructiveness on small furry critters
[QUOTE=257weatherby
Am assuming the 110 Interbond is for inside 200m and the Gameking for outside that? I use the 110 Accubond and 117 Prohunter/SST that way, although the Prohunter doesn't blow up at close range like the gameking on a heavier annimal does. The 75 Vmax is awsome destructiveness on small furry critters[/QUOTE]
Ive only got the interbonds at the moment because I made a trade with a forum member to have a try see if I could get them to group well. No real intention to use as a close range pill. I've got a .307 which I use if I'm expecting any thing in close. How do you find the accubonds I've got enough to do load testing and then Make a call if I want to buy some after that
Sent from my iPhone using Tapatalk
Hi Guys
I've settled on 117gr pro hunters with 47gr 2209. Still no chrony. Shooting inch groups @ 100yrds. Happy with this load but will play around with it one day to see if I can tighten things up a big. The 117gr prohunters are devastating on goats and pigs, they hit hard and the animals don't get up. I also tried 75gr SST and they also grouped 1 inch with the only load I tried but will stick to the 117gr prohunters.
I also have a 303-25 that I will try the 75gr SST, it should do 3200-3300fps. Could be a fun load.
I also added a Gunworks Sparten suppressor that I can swap between to both 25 cal rifles.
P17 (M17) 25-06 Remington
Attachment 28612
In my Sako 75 2506 the best results were with 2217 running 117 SST's and 110 AB's. I started at 2209, then 2213SC but slower rate of 2217 gave tightest grps
