250-3000 (250 Savage)

Quote:

---

Originally Posted by Tentman

@Lucky - I have a full box of Sierra 100 gn spitzers #1620 and maybe half a bix of #1625 100 Gn boattails if thay are any use to you - Ken Waters in "Pet Loads" says they will stabilize in the 1:14 twist , and the listed loads get them going at 2770. I'd say a bit more speed is perfectly feasible in a Mauser 98 action like the Kurz, I run my Kurz 6.5x47 fairly warmish (by "Mauser" standards anyway) and I'd say you should get them to 2850 fps. If you send me your rifle and case capacity I'll tun some scenarios in GRT and Quickload for you.

---

Ill take the 100 grainers please Foster.

Hornady make a 87 grain spire point. The 87/90 gn projectiles in .25 cal are quite soft in construction. I’d call them a heavy varmit pill. I used a lot of them in the .257 Roberts and .25/06. Great for Roos and small to medium pigs and goats. I had some monumental failures on large goats, pigs, fallow and horses due to lack penetration. Four in the shoulder of one horse without getting through before I slowed it up for a head shot. You need to go to 100 grains in cup and core to get reliable performance in .257 cal.
Barnes x would be worth a try in <100 gn pills if you can’t or won’t shoot 100s.

@Lucky

The Sierra 'Varmiter' SPT (Semi-Point) 87 grain seems to be the ticket, specifically mentions the 250-3000 Savage too.

On their website: https://www.sierrabullets.com/produc...ber-87-gr-spt/

Seems like these guys sell them: https://www.outdoorsupplies.co.nz/Sierra_Varminter.html

Best of luck!

Ok , ordered 200 of the 87gn Sierra's , next problem is the brass ....

Quote:

---

Originally Posted by Tentman

@Lucky - I have a full box of Sierra 100 gn spitzers #1620 and maybe half a bix of #1625 100 Gn boattails if thay are any use to you - Ken Waters in "Pet Loads" says they will stabilize in the 1:14 twist , and the listed loads get them going at 2770. I'd say a bit more speed is perfectly feasible in a Mauser 98 action like the Kurz, I run my Kurz 6.5x47 fairly warmish (by "Mauser" standards anyway) and I'd say you should get them to 2850 fps. If you send me your rifle and case capacity I'll tun some scenarios in GRT and Quickload for you.

---

Interesting. I have a 25-303 that i still havent sorted to shoot. BUT it is a 1-12. Pity it isnt 1-10
Got some of the 87gr's (super?) that were used in them back in the day but suspect they are way to light for bigger stuff.
They were meant to be very good on 'roo's and goats

Quote:

---

Originally Posted by Lucky

Ok , ordered 200 of the 87gn Sierra's , next problem is the brass ....

---

If you cant find any remember either of 6 or 6.5 Crudmoor is just 250-3000 Improved . . . .

Quote:

---

Originally Posted by Tentman

If you cant find any remember either of 6 or 6.5 Crudmoor is just 250-3000 Improved . . . .

---

Didn't know that , the day was not wasted after all ...., Hornady do it trying to track some down

Winchester make it as well , is Hornady the better brass of the 2 or nothing in it ?

Try necking up .22/250 brass. Maybe in two stages using a 6mm expander button in your die, before the .257 one. Anneal first if you start loosing cases.

Gunworks have brass on there website.

And Reloader Supplies have Hornady and Winchester 250 brass listed.
As for quality Winchester used to be very good and the 250 Sav AI brass I am using is going well. The last lot of Win 22 Hornet brass I bought about 2 years ago is rubbish.
The new Hornady 250 Sav brass I have stored away looks good but I haven't fireformed it yet.
Norma once made 250 Sav brass and it was excellent.

Have ordered 50 hornady cases to get me going , should be fine