Printable View
Hi Guys
So I’ve just joined this forum because it comes up so much in my google searches!
Some great info here!
I’m doing a 30 Nosler build and wondered if anyone has any first had load data using eld-m loaded to max length
I’m thinking AR2217?
TIA
Sent from my iPhone using Tapatalk
2225 is you friend. Have a mate with a 30Nosler and its performance is very impressive
Forgot to mention
225gn eld-m[emoji106]
Sent from my iPhone using Tapatalk
Are you comitted to the 30 Nosler, consider doing a 30/28 Nosler.
28 nosler case is longer with more capacity than the 30. Neck up 28N to 30 cal.
Ryan Pearce in the US has been building a few of them with great success.
Berger are better in both my mates 30N and my 300NM past 1000m, inside this both are roughly as accurate as each other.Quote:
Originally Posted by Reloader75
I’ve read about it and don’t want the bother for a few extra FPS.Quote:
Originally Posted by GWH
Mate has 28 nosler and compared the cases, about 1.5-2mm longer to the shoulder.
For me this is about building a modern cased 300 magnum comparable to WinMag and build the rifle around the optimum bullet and CBTO[emoji106]
So any good loads for 30 Nosler with 225 eldm’s
2217, 2225?
Cheers A
Sent from my iPhone using Tapatalk
@cameronjackwhite was yours a 30n?
Sure was, I only ran the 208eldm though. Was the 1st load developed and was deadly accurate so stuck with ItQuote:
Originally Posted by superdiver
Hi Cameron
I’ve got the 208s too
What load were you using for the 208s?
Cheers
Sent from my iPhone using Tapatalk
Hunting rifle or target? Sorry no info on loads just watching with intreste
86 grains of 2217 for a mild 3050. I know guys were getting more but that was accurate and plenty fast enough for what I want and needQuote:
Originally Posted by Reloader75