-
308 from 7mm08 brass?
Hi, would it be possible to run some 7mm08 brass through the 308 full length die and load it for 308? Picked up a heap of Norma 7mm08 brass at the range and would love to use it. Any help would be appreciated.
Sent from my iPod touch using Tapatalk
-
Go for it but make sure you lube the inside of the case neck
-
I've done a fair bit for my .308
I annealed it prior and as above, plenty of lube.
-
I've done it and it works fine. You end up with a short neck but it doesn't affect accuracy. In theory it's possible to develop a carbon ring in the chamber ahead of this short neck but I've never seen it in mine
-
Thanks guys! Will give it a crack with good lube!
Sent from my iPod touch using Tapatalk