Thread: 338 Edge

Originally Posted by Dermastor

Brass is too expensive to push that hard. I have some brass that came with a 338 Lapua that can't be chambered the head has expanded soo much, I hate to think of the pressure those loads produced

I bought some once fired Lapua 338LM brass (factory loaded with 250gr projectiles) that had been run through a AIAW from memory. Needed to use a custom small base die to get it to chamber in my rifle (similar to what happens with 223 brass in military chambers). Can't believe that factory loaded Lapua would be over pressure.

Sent from my SM-N950F using Tapatalk