Thread: 338 lapua issues.

Cheers Cam will give that a try. I see the new brass point but technically trimming and sizing should be enough I thought. The brass was originally fired in an Accuracy International AW338.

Originally Posted by EK9132

Cheers Cam will give that a try. I see the new brass point but technically trimming and sizing should be enough I thought. The brass was originally fired in an Accuracy International AW338.

Once again I know nothing...Is that a military rifle? if so it may have generous chamber dimensions and you may have body issues possibly.

Originally Posted by EK9132

Cheers Cam will give that a try. I see the new brass point but technically trimming and sizing should be enough I thought. The brass was originally fired in an Accuracy International AW338.

Try Cams advice, most likely not sizing enough.

Get some Lapua brass for it, if you want to be able to push it "hard", if not Norma will do the job nicely, just will be a grain or two shy of what the Lapua will cope with happily.