Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Darkness Delta


User Tag List

+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 36
Like Tree28Likes

Thread: 6.5 prc, who's loading what and how's it working?

  1. #16
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    11,914
    Quote Originally Posted by GWH View Post
    Which one of your 3 223's would you keep? ;-) ........Wait I know.....the T3 that shoots the 77 TMK ;-)
    Haha. I guess.

  2. #17
    Member
    Join Date
    Mar 2014
    Location
    Tauranga
    Posts
    2,964
    Quote Originally Posted by Kudu View Post
    I have been in the same mind and want a PRC. Although when I look at the numbers they don't seem to offer to much over my .284. I have a 19" barrel and I push the 140gn VLD's at 3040fps. So I am not really gaining anything.
    Yeah pretty close, little bit less recoil than my 284 shooting 162s, not that it's uncomfortable at all but does hop around making follow ups a bit harder.

    I'm thinking mainly for the availibility of factory ammo and keeping both my hunting rigs at 6.5s for simplicity.

    Might try keep the barrel at 24 inches on this and shoot unsuppressed for a bit

  3. #18
    Banned
    Join Date
    Mar 2015
    Location
    North Canterbury
    Posts
    5,462
    Quote Originally Posted by stevodog View Post
    Do it @Moa Hunter treat yourself. Do you have a suitable donor rifle?
    I have a 270 and shoot 140 AB's at 3000. If I went to ELD's I would get 3100 so I dont know if there is enough gain. I like the 6.5 Saum ballistics with 140's at 3200.
    But how far do I need to shoot ? Went on an overnight scouting mission yesterday and saw so many deer I didn't know which one to shoot, all DOC. Sixteen in one little gully, I crept to within 80 metres of them, two spikers got to 40 metres from them. Saw four at 600 ish but could have got within 200 in ten minutes- if you shoot them you have to go over there so might as well go some of the way before shooting. Spooked two at 20 metres while looking at flowers and they were the only ones that I would not have been able to shoot. I think a light little 6.5x47 would be the go !
    stevodog and csmiffy like this.

  4. #19
    Banned
    Join Date
    Mar 2016
    Location
    auckland
    Posts
    2,453
    Wow, can I go hunting at your spots?I seen f all around mine last few outings. My luck must change soon or ill go on a farm hunt to get my mojo back

  5. #20
    Member Lucky's Avatar
    Join Date
    Apr 2019
    Location
    Silverdale
    Posts
    1,020
    Man I don’t want one or need one but I kinda want one ......
    Moa Hunter likes this.

  6. #21
    Not just an internet expert... The Claw's Avatar
    Join Date
    Dec 2011
    Location
    Gore
    Posts
    2,053
    You definitely need 1...

    Sent from my SM-N975F using Tapatalk
    If it's not a first round hit you need to practice more

  7. #22
    Member stagstalker's Avatar
    Join Date
    Jul 2018
    Location
    North Island, New Zealand
    Posts
    2,128
    Has anyone got experience comparing felt recoil between a 284 shooting 162s and a 6.5PRC with 140 - 147s?

  8. #23
    Member
    Join Date
    Apr 2019
    Location
    Wanganui
    Posts
    2,989
    Quote Originally Posted by Kudu View Post
    I have been in the same mind and want a PRC. Although when I look at the numbers they don't seem to offer to much over my .284. I have a 19" barrel and I push the 140gn VLD's at 3040fps. So I am not really gaining anything.
    Heap more hitting power out far hard to beat the 156 Berger for bc at 2900 will leave the 140 for dust at 3040 in energy go on new is fun
    25 /08 IMP likes this.

  9. #24
    Banned
    Join Date
    Mar 2015
    Location
    North Canterbury
    Posts
    5,462
    Quote Originally Posted by stevodog View Post
    Wow, can I go hunting at your spots?I seen f all around mine last few outings. My luck must change soon or ill go on a farm hunt to get my mojo back
    We had a big rainstorm go through the night before, I walked in and camped, got up at 4am and walked along a bush ridge to be coming into the open at 5.50 am. The big group of deer obviously had not seen action in a while but they were all back in the bush by 7am even though it was cold and overcast. I carried a swanny in, so that I was very quiet in the wet scrub.
    Stevedog Is there sign down in the scrubby faces and the grass in the scrub margin ? If there is sign, just get there at the right time. Take a sleeping bag.
    stevodog likes this.

  10. #25
    Member
    Join Date
    Nov 2018
    Location
    Blenheim
    Posts
    356
    Stagstalker the PRC I sold Nick was very pleasant to shoot . It was a lot lighter recoiling than my 30/284 with 155 amax's . I was using 143 eld's factory .
    stagstalker likes this.

  11. #26
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,766
    Quote Originally Posted by The Claw View Post
    You definitely need 1...

    Sent from my SM-N975F using Tapatalk
    What is the bipod on there @The Claw , I am lookiing for something lighter better than the harris
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  12. #27
    Not just an internet expert... The Claw's Avatar
    Join Date
    Dec 2011
    Location
    Gore
    Posts
    2,053
    It's a Tier One mate, with carbon fibre legs. I quite like it, solid and stable without being overly heavy. Have leg extensions for it too and the claw feet which are bloody good.

    Sent from my SM-N975F using Tapatalk
    veitnamcam likes this.
    If it's not a first round hit you need to practice more

  13. #28
    Member
    Join Date
    Aug 2017
    Location
    Timaru
    Posts
    715
    My PRC is a 26” 1/7 twist kreiger
    I tried the 150 sierra MK originally but wouldn’t group well enough. Went to 147 eldm. They went really well and super accurate but would get random exploders. I ran them out to 1 mile pretty well and used at a few matches. Ar2225 3120fps. After a couple of firings I then started to get some pressure so dropped a grain of powder. Ran at 3060fps. Then changed to 156 Berger EOL, at 3020fps. Same charge as 147 eldm. I have done one match, and shot them out to 2km. Trajectory wise matches my 338lapua with 285. I have also done a 130 bergeR AR hybrid at the same charge and was a mild 2950fps if I cranked the charge up they would probably do 3150-3200 easy enough Was super accurate to 400m but not as good further out. I’m thinking twist rate. Worked well on deer heads. I have some 144 Berger on the next order coming in to use and 153 Berger. Shot 800 rounds down it so far 1/2 at matches.

    I am running a long action and col about 3.075
    veitnamcam and Moa Hunter like this.

  14. #29
    Member
    Join Date
    Nov 2018
    Location
    Blenheim
    Posts
    356
    Heres a Facebook group that worth a look for the 6.5 Prc https://www.facebook.com/groups/1228995833870540/

  15. #30
    Member
    Join Date
    Mar 2014
    Location
    Tauranga
    Posts
    2,964
    Quote Originally Posted by stagstalker View Post
    Has anyone got experience comparing felt recoil between a 284 shooting 162s and a 6.5PRC with 140 - 147s?
    Virtually identical powder charge with 85% projectile weight so going to be lighter recoiling than the 284 for sure. My 284 is plenty comfortable to shoot but does hop around a bit, even with a good bipod load

 

 

Similar Threads

  1. Working Wei
    By Munsey in forum Trial, Pedigree and Bird Dogs
    Replies: 2
    Last Post: 20-07-2016, 06:42 PM
  2. Working on summer
    By linyera in forum Taxidermy
    Replies: 12
    Last Post: 22-02-2016, 04:38 PM
  3. What I'm working
    By linyera in forum Taxidermy
    Replies: 11
    Last Post: 24-09-2014, 10:03 AM
  4. I´m Working !!!!
    By linyera in forum Taxidermy
    Replies: 14
    Last Post: 04-02-2014, 01:39 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!