G'day all,
First post here so take it easy - I'm in NSW/Aus and have recently acquired a Kimber Montana 6.5-300WSM built by your very own Abe (tui_man2) at some stage and I just wanted to get a complete picture of load data for this cal as I have not owned one of these before. I have PM'd Abe but he's either busy or has a full inbox so will throw it out there for everyone else until he gets a chance to reply. Please feel free to comment on what I have so far and correct anything I'm wrong about. I do know from previous owner who is on here that it was spitting 140 Bergers at 3250-3300.
Start with:
270WSM brass (Winchester atm as there is no Norma in Oz for at least 12 months)
Run once through 6.5-300WSM Redding FLS die
Trim case length 2.9" ??
Neck turning NOT required ??
Federal 215M primer
64 to 65gr AR2225
140 Berger Hunting VLD loaded to 3" OAL ??
I'm happy to exclusively run 140 VLDs at this stage but wouldn't mind your best loads of a 120/123gr projie as well, in case I feel like mixing it up.
Cheers from Oz and y'all are lucky we letcha have Bledisloe the other night. Goodness of our hearts
Jas.
Bookmarks