Anyone got any loads with 2217? Also heard around 59 grains of reloader 23 works well. Any tricks with seating depth?
Printable View
Anyone got any loads with 2217? Also heard around 59 grains of reloader 23 works well. Any tricks with seating depth?
65-67gr 2217
From the ADI reloading data website.
http://www.adi-powders.com.au/handlo...S.A.+Ultra+Mag.
162 GR. HDY SPBT AR2217 .284" 2.825" 67.0 C 2902 60900 psi Max load
I run 67.5g with 162, 3k from 22" mod 7 barrel, shoots well.
GWH, did they need to be near the lans to shoot? Or mag fit work?
Im running 162 eld hunting with 64 of 2217 just starting to get pressure out of a 26 inch but only getting 2900
Buzzman told me he can get 2950 with 59 grains reloader 23. 22 inch barrel. Sounds good to me. Just got to find some reloader 23!
Yeah? How much is not cheap?
Gunworks have some RL23 if you're in Sth Is.
ADI 2217 works fine - just finished load dev on SAUM w 162AMAX (the old ones) 65.9 gn 2217 ~30thou jump, 2885 fps 0.5 moa. Two shots in one ragged hole the 3rd shot I pulled a tad, still came in 0.5 moa. Even this is slightly compressed load and you need to be careful to tap down load while filling.
Hi guys does any 1 have a load for 7mm saum with n165 over 162 eldx. Or a starting load to work up from struggling to find any info online. I have a mod 7 with a 24inch true flight barrel. I've been using 2213 but was recommended n165 to try. Any help would be great. Thanks