just ordered some 75g amax for a varmint t3.
I got some lapua brass cci primers some 06h and 08 powder. any body having luck with these combinations?
Sent from my SM-G900I using Tapatalk
Printable View
just ordered some 75g amax for a varmint t3.
I got some lapua brass cci primers some 06h and 08 powder. any body having luck with these combinations?
Sent from my SM-G900I using Tapatalk
Couldn't get 75 Amax to stable in my t3 gone done to 50gr hollowpoints
forgot to say it's a 1 in 8 twist heavy barrel
Sent from my SM-G900I using Tapatalk
Are you going to seat to fit mag or single feed?
I used 2206H with them in my Sako (1 in 8").
if I have to I can deal to the mag to make them fit.Quote:
Originally Posted by dogmatix
I havn't got that far yet as got to pick up the scope on sat and set up.
are you single feeding to get better accuracy?
Sent from my SM-G900I using Tapatalk
I managed to get 75 Amax's to shoot out of my 1:8 223 Tikka, using 24.4gr of 2208 getting around 2750fps.
I posted this in the projects section a few weeks ago, extending my magazine for 75gr Amax's. http://www.nzhuntingandshooting.co.n...ine-mod-27848/
There's an easier mod here, Tikka T3 .223 Magazine Modification - How To: | Hunting Rifles | 24hourcampfire
I did when doing load development, but the Sako extractor is a right pain if you are extracting an unfired round. The Tikka is better in that regards.Quote:
Originally Posted by andyanimal31
Plus you can mod the Tikka mag a bit to create more internal length, unlike the steel Sako mag.
I certainly got good accuracy, but ended up using 65gn Sierra Gamekings as my hunting load and 55gn VMaxes as my varmint round.
I have 2 t3s with 1:8" twist that both shoot.
We are using 2206h but I hear you will hey better speed with 2208 (iirc)!
Using CCI primers and ADI brass.
One rifle is 24 the other 24.2 as standard. M/S is 850 so not fast but handy
Sent from my SM-G900F using Tapatalk
some great info thanks guys!
I will post some results as the scope turned up tonight and all reloading shit here except the lapua brass due tommorow!
Sent from my SM-G900I using Tapatalk
PS, I was getting 2715fps with 24.0gn of 2206H, Fed Match primers and weight sorted RP brass. My Sako likes mild loads.
Test loads seated to touch were 0.4 MOA, didn't find the sweet spot for distance to lands before I went to other projectiles.
Also I don't know the oal, but the rounds are just mag fit. Also unsure of jump, but I haven't bothered to check as it shoots well enough without mucking around anymore. (That's also the same reason that the suppressor I bought hasn't been fitted yet as I don't want to screw the load)
Sent from my SM-G900F using Tapatalk