Thread: 7mm PRC brass

Alpine precision stock ADG seems to be the best way to get the most out of the cartridge

I'm using ADG from Alpine Precision - seems good so far and Cam is great to deal with. Started using WRE large magnum primers as I could get my hands on them. They were very tight fitting to the point that it was pretty tough to seat them flush. Managed to get a box of Fed 215s when the last shipment came in and they seat much easier.

I see Workshop Innovation now has Peterson brass in stock too, which gets good reviews.

Originally Posted by Edunn

I'm using ADG from Alpine Precision - seems good so far and Cam is great to deal with. Started using WRE large magnum primers as I could get my hands on them. They were very tight fitting to the point that it was pretty tough to seat them flush. Managed to get a box of Fed 215s when the last shipment came in and they seat much easier.

I see Workshop Innovation now has Peterson brass in stock too, which gets good reviews.

Common issue with white rivers while they perform well their a omen pain to seat I’d crush 1/5 trying to seat in my alpha brass

Originally Posted by Kelton

Common issue with white rivers while they perform well their a omen pain to seat I’d crush 1/5 trying to seat in my alpha brass

Yeah not worth it in the end for me. Too hard to get them flush. Was getting about 35 fps more than with the 215s

Originally Posted by Edunn

Yeah not worth it in the end for me. Too hard to get them flush. Was getting about 35 fps more than with the 215s

Interesting to hear I always found them between 210 and 215 in saum . They are actually thicker so getting them flush is near impossible without reaming pockets they seat fine in some brass tho Winchester and sako seem to be sweet