Hi pals........ Does anyone have any load data for 9.3x57?
Also if anyone has any 9.3mm pills?
Can you please mention or pm me if you can help.
Cheers, 40mm
Printable View
Hi pals........ Does anyone have any load data for 9.3x57?
Also if anyone has any 9.3mm pills?
Can you please mention or pm me if you can help.
Cheers, 40mm
I will pm you my loads projectiles are available from the norma agents in 232 and 285 grains and woodleighs from dead eye dick in 250 and 310 gr. Robert (shooternz) also makes a 250 flat base and 285 gas check
Thanks mate
Gunworks usually has some 9.3 projectiles. I’ve used the 286gr prvi partisans. Smashed a red stags neck vertebrae at 97yds. Shoot well.
Is that a NZ forum? I dont really want to sign up to more stuff.... was it load data? It wont let me see it without signing up.Quote:
Originally Posted by Micky Duck
its in USA...Ive been member for years and moderator for most of that time... heck of a good load data section and the pointblank ballistics is free and easy to use. will see if can copy n past that page for you......
hold the line caller.
I will pm you my loads projectiles are available from the norma agents in 232 and 285 grains and woodleighs from dead eye dick in 250 and 310 gr. Robert (shooternz) also makes a 250 flat base and 285 gas check
You sell it well. Maybe I should sigh up.
185
S&B SP
N-1§40
49
2300
NA
0
CCI
Submitted By: K.W.
[ Report This Load! ]
255
SP
VihtaVuori N-140
51
2263
NA
0
CCI
Submitted By: K.W.
[ Report This Load! ]
255
SP Sako
VihtaVuori N-540
51
2200
NA
0
CCI
Submitted By: K.W.
[ Report This Load! ]
255
SP Sako
VihtaVuori N-140
54
2360
NA
0
CCI
Submitted By: K.W.
[ Report This Load! ]
255
Nosler Ballistic Tip
N-140
50
2275
NA
0
CCI
Submitted By: K.W.
[ Report This Load! ]
255
102D Sako
N-140
50
2200
NA
0
CCI
Submitted By: K.W.
[ Report This Load! ]
285
SP
Norma N-201
45
0
NA
0
Fed
it doesnt look that way on site but you have what data is there...hopefully of some use to you.
Here's mine for reference purposes only. There are much nicer ones around but I like it. At the ranges I use it over iron sights are no disadvantage at all.
Nicer ones? Looks plenty nice to me!
Sent from my iPhone using Tapatalk
Hey michey duck, have you ever found some of those sellier and Bellot light projectiles in nz? I believe they are 193 grains actually. I d love to put my hand on some
Greetings @40mm,
Loaddata.com has stacks of data. This is a subscriber site with some open data. Includes data from Handloader over the years plus articles. Might be worth a look.
Regards Grandpamac.
Thanks @grandpamac
I settled on 2206h after a bit of a lateral journey. I found the European load data Micky posted but didn't have or want to buy them. Mention was made of 358 win loads being sucessfully used and there's piles of data on that.
Brought a box of Norma ammo chronied some , pulled some to get an idea of fill height and charge weight then looked at case capacity versus the 358 which is virtually the same.
I also had a look at some 9 x57 data which was obsolete using 2206
2206h and 2208 are recommended for the big brother the 9.3 x62 and the 358 so it seemed logical to try.
I loaded up a small ladder of 2208 and 2206h and shot them over the chrony and settled on 2206h as I have the most of that.
I'm still about 50 fps behind the factory with 47.5 grains and might step it up a little but its going ok as it is still I would like to crack the 3000 ft lbs mark and another half grain might get me there.
Primers still have nice rounded edges not that primer condition is a great tool but if they're not flat to the edge of the pocket you still have a little room to move around in..
I think you maybe struggling to crack 3000fps MartyQuote:
Originally Posted by Marty Henry
give up on 2206h.Quote:
Originally Posted by shooternz
Try Det cord, that will get em moving....