anyone got a 9mm load they could share with me . i currently have a lot of brass ,small pistol primers , and powder adi ap70n , haven't got projectiles yet but looking at 124gr fmj , or is the115 gr better . want this for ipsc
thanks in advance
Printable View
anyone got a 9mm load they could share with me . i currently have a lot of brass ,small pistol primers , and powder adi ap70n , haven't got projectiles yet but looking at 124gr fmj , or is the115 gr better . want this for ipsc
thanks in advance
I'm using 4.0gr Hogdon Titegroup and 124gr Rusa reloading flat point.
4gn n320, 124gn rusa flat points.
I prefer the 124 gr your pistol may like 115 gr try both start load with ADI AP70 is 4.3 for 124 and 4.5 for 115 gr max load is only .5 grain more with both weights
not much error margin, just load for 100% functioning. One reason why I shoot revolvers 99.9% of the time.
I load 125gr Spartan Conicals over 4.2gr Win 231 for my Glock. It moves pretty quick, well over PF
125gr Spartan Conicals, 4.1gr ADI AP70N, 28.5mm OAL works for me.
people keep telling me to use 115gr projectiles for IPSC but i'm ornery sometimes.
I loaded up a couple thousand rounds using AP70 when it was the only powder I could find. 3.8gr under a rusa 124gr flat point seated to 1.10" did somewhere around 128-130 PF. 4.4gr did 135 PF.
I used 4 grain of AP70 with Rusa 124gn RN. Was a bit snappier than AP50 but worked ok
Same as myself :) :)Quote:
Originally Posted by stug
200grn Rusa with 4.6 grn titegroup. Not in 9mm but at least I don't feel kissing a guy every time I fire it. [emoji16]
Sent from my SM-G935F using Tapatalk
That's because you have the pillow between your lips......Quote:
Originally Posted by R93
Says the fella with all the bite marks on his vehicles headrests[emoji16]Quote:
Originally Posted by Beaker
Sent from my SM-G935F using Tapatalk
At least they have lipstick around them....Quote:
Originally Posted by R93
Hmmmmm....Quote:
Originally Posted by Beaker
Sent from my SM-G935F using Tapatalk
I am using 4.2gr on AP-70N loaded to 1.06" COAL using PMC cases and Federal No.100 primers with the Rusa 124gr FP.
Average velocity of 1065fps, PF of 132 (ES of 10, SD of 4.2).
I am probably going to try 4.1gr next load test and see if I am still making minor PF.
I use 3gn AP70N with 147gnJHP for a nice sub load in my Quarter Circle 10.