Going to be loading some 180gr Accubonds, what powder are others using for these in 300wsm?
Cheers,
Dan
Printable View
Going to be loading some 180gr Accubonds, what powder are others using for these in 300wsm?
Cheers,
Dan
When I had my one I used 65 grs of AR2209 for about 2970 fps. I think it is a bit over book max so work up to your safe max. Rifle was a Ruger 77 MKIi
That was with the 180 gr Accubonds
Superformance powder is meant to be good in the 300WSM
IMR4350 for 165gn pills or Hyb100V for 180s
I was looking at hybrid 100V. Thinking that I should give it a try and then have a look at ADI.
I’m getting pretty impressive speeds with 100V with 180 Bergers - around 3050 fps. Have some more load dev to settle on most accurate load but it looks likely to be north of 3000fps:thumbsup:
Is the Hogdon powder pretty temperature stable?
Dunno, its a fairly new powder released by Hogdgon. In general most new powders seem to claim they are more temp stable .... whether that true or marketing BS who knows. But in NZ conditions I doubt there's enough temp variation to really worry too much about.Quote:
Originally Posted by 300wsm for life
99% of time NZ will be 15C +/- 10C. I guess if you're chasing Tahr mid winter in extreme weather then thats a bit different. Even then I'd be keep the ammo in my pocket anyways.
Yes it is as it is ADI powder re labelled. In the manual I use Hybrid 100V doesn't appear to have a ADI equal but it's burn rate sits between H4350 and H4831. Ideal for calibers like the 270 Win,243 SSMag,300WSM, 7mm Mag and 300 WM to name a few.Quote:
Originally Posted by 300wsm for life
RL 17 is bloody good, 62gr with 200gr eldx doing 2920, nothing gets away.
Hey @Blackmac what sort of ranges are you using the 200gr eldx's at?
What rifle or barrel you running? And whats your COAL?Quote:
Originally Posted by Blackmac
20-600yards , rifle is an xbolt 23 inch barrel. Topped with a vx3 4.5 -14 Boone & Crockett reticle. Check coal tomorrow, been using this load for about 3 year's I'll never change.
I bought the 300wsm for bull thar and red stags but use it for meat hunting as well so I get practice and gets the job done. I find the eldx don't do heaps damage to smaller animals like fallow and more damage to reds and Bulls. At about 450yards I'll find the projectile just under the skin on the opposite shoulder mushroomed as it shows on the box and at a guess 70% of its weight. Shoulder shoot everything and there dead on the spot.
Sounds like a good round. I've been using the 150gr BT for the last 12yrs. Wanting a change. I'm using the older A Bolt stainless stalker. Have you got a few 200gr eldx to spare? Buy a few off you to test if you have some to sell.
Just loaded up some 200 gr ELD X with RL 26 for my 300 Win Mag hope to get around the advertised 3000 fps, Should be much like @Blackmac load in the WSM. Hope it's accurate.
Hi Tikka, coal is 72mm I struggle with imperial.
Hi @300wsm for life, I have 11 eldx left which you can have. I've got about 150 rounds loaded so won't be loading for a while. Send me a pm, youll will find the 200gr takes over the 150gr out past 400yards.
Pm inbound @Blackmac. Thanks heaps.