The newer ADI .223 brass is coming out with a larger primer hole than the older stuff, has anyone looked into or found any difference using these, or seen any articles relating to the primer hole size ?
Cheers, Red:)
Printable View
The newer ADI .223 brass is coming out with a larger primer hole than the older stuff, has anyone looked into or found any difference using these, or seen any articles relating to the primer hole size ?
Cheers, Red:)
As long as its in the middle, I bent a decapping die rod on an off centre flash hole in an ADI 5.56 case.
It was so far off, the hole was touching the side of the primer pocket.
:pissed off:
Haven't noticed myself and I have just necked up a few hundred once fired ADI 223's to 6.5mm
It should say on the packet, or at least mine did. Something like new larger flash hole.
I'm doing my load again.
I asked adi what effect this will have on my load. They just said like any change in ammo components re-work your load.
Yeah, I've just fired off a heap at a fun shoot and realized I hadn't separated them out, so guess I'll have to start again and take more notice :(