Any tips on where we can get 2209 in the north island?
the current US climate is making it hard to stock up and prepare for the coming precision rifle season.
Cheers you lot.
Any tips on where we can get 2209 in the north island?
the current US climate is making it hard to stock up and prepare for the coming precision rifle season.
Cheers you lot.
Where have you tried so far?
I bought a bottle from Gun Bits in Opotiki a week or so back. From memory the guy is Graeme Pask and runs an engineering/hardware store there. Failing them, try Cerakote NZ in Tauranga.
They all are at the moment, I had to go to Hastings to get some 2217 and I'm in palmy.
Theres plenty of IMR 4350 floating around, pretty much the same.
This sounds familiar..............managed to get probably the last of the 2213SC in the South Island about 3 weeks ago
Looked all over for 2209 with no luck so ended up with RL17 which I believe used to be hard to get.
Yep, I have some on back order for when it supposedly arrives this month, but who knows it may not arrive.Quote:
Originally Posted by berg243
Nope, Hodgdon 4350 is similar to 2209.Quote:
Originally Posted by Husky1600
IMR 4350 has a different burn rate.
@ebf is there a table similar to the powder equivalents that has burn rates?
I like that idea! I've got three of em that don't have a current purpose, if I wait I might be able to retire on them :)Quote:
Originally Posted by berg243
I got the following after ringing a few gun shops: Apparently powder cant be posted/couriered anymore and alot of gunshops are awaiting late september for the rep to drive up and down the country dropping off powder.
Got to be careful with those "equivalent" charts. Usually they match up different powders and state them as having exactly the same characteristics when in a lot of cases they may not, in particular depending upon the cartridge they are loaded in.
In the case of the one in Post 11 is places Hodgdon H4350 as being ever so slightly slower than ADI2209 when in actual fact they are exactly the same powder. The only difference may be is that Hodgdon may get 2209 with tighter upper and lower tolerances from Thales then brand it with their name. Although that one does say "comparative".
To be used as a guide only.
In the case of ADI lines it has to arrive in the country first. Dealers like Steve's Wholesale do the powder runs.Quote:
Originally Posted by Timmay
And nothing is guaranteed with delivery dates into NZ even from Oz. Very few ships will carry. Several years ago, so the story goes, NZ's Vihtavuori order initially got unloaded in Oz then ended up back in Finland.
I had 2 lbs each of 300mp and RL26 turn up at the shop today. If it doesn't go off for some reason I should never have to buy anymore for quite a few years.
Sent from my SM-T510 using Tapatalk
This is the one I tend to useQuote:
Originally Posted by charliehorse
Powder equivalents - ADI World Class Powders and Ammunition
Even different batches of the same powder can have pretty significant changes. Speak to any fullbore shooter and they will tell you about batch differences in 2208.
In my experience Hodgdon seems to have slightly less variation compared to ADI.
AP 70n on the out too for those who use it for loading pistol, local gun shop owner had close to a kg in his personal stash and sold that to me to keep me going for now
I got the last 500g from reloaders for 2209 - yes like fairy dust...
I believe there is one left at Gun City on the North Shore in the whole of GC too.
CD.
similarly 2217 - GONE!!!!!