Thread: anealing service

Originally Posted by P38

Your onto it Maca.

Your eye is your best tool, watching the colours run and counting to four still works for me.

Tui_man2
Does your new brasscome with the Neck/Shoulder already annealed?

I would be interested to know how much inconsistency you have experienced or measured using any of the above methods.

Here's another method which is precise, confirmed with Tempilaq.
brass annealing machine.mpg - YouTube

And pretty simple too.

Cheers
Pete

Still has error but if not shooting far then it wont matter anyway.

Lapua is as good as it gets an it comes annealed ready to load
Doing it by had is to hit an miss

I have made an are making 4 machines like my one but smaller an nice, i do think it is good to do but have to do it right an all timed the same, an for bigger odd ball cases i have to anneal in the forming stages to work the brass easier

then once all that effort it done i try to keep them good an anneal every 3rd firing to get them all the SAME consistancy.
Found by hand i would have un explained fliers witch LR you dont want.

There are a few machines out there that people would happy pay to do your brass, I would do it but its the sort of thing i would wait till i had a few to make it worth while to do