Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Delta Terminator


User Tag List

+ Reply to Thread
Results 1 to 12 of 12
Like Tree9Likes
  • 1 Post By Steelisreal
  • 2 Post By CBH Australia
  • 2 Post By grandpamac
  • 2 Post By 6x47
  • 2 Post By RugerM77

Thread: ar2209

  1. #1
    Member
    Join Date
    Apr 2018
    Location
    auck
    Posts
    202

    ar2209

    does anyone load 308 with ar2209? website says 2209 is equivalent of win760. but cant find any data in 2209 for 308.

  2. #2
    Gone but not forgotten
    Join Date
    Apr 2017
    Location
    Hamilton
    Posts
    4,129
    Try looking for H4350 data, it is 2209 with a different sticker on the bottle.

  3. #3
    Member
    Join Date
    Apr 2018
    Location
    auck
    Posts
    202
    awsome

  4. #4
    Member
    Join Date
    Jun 2019
    Location
    Manawatu
    Posts
    1,090
    760 works ok for the 160 and up bullets. H414 is the same powder as well. What bullet weight you after? My Lyman manual has a few loads mentioned.

  5. #5
    Member
    Join Date
    Jan 2018
    Location
    Christchurch
    Posts
    669
    [QUOTE=holdover;1405194]does anyone load 308 with ar2209? website says 2209 is equivalent of win760. but cant find any data in 2209 for 308.[/QUOT2

    Be aware that equivalent absolutely does not mean the same as, and most definitely doesn't mean you can use data of one for the other. 760 is a ball powder and a very different animal to AR2209.

    Depending on the projectile weight you want to use AR2206 or AR2208 are much better choices for 308. If you have some 2209 it shouldn't be hard to trade with someone on here?
    dannyb likes this.

  6. #6
    Member
    Join Date
    Oct 2021
    Location
    Broken Hill
    Posts
    407
    If there is no listed data then pass on the idea unless you you really know the subject well.

    At $150kg it's not worth blowing yourself up for.
    As suggested 2206 or 2206H & 2208 are often used with good results.
    Nugget connaisseur and dannyb like this.

  7. #7
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,793
    Greetings,
    The only data I could find was for IMR4350 from the 1970's. This showed low velocities, around 200 fps below faster powders with a compressed load. IMR4350 is slower or faster than AR2209 depending on which data you use so the short answer is that it is not suitable in the .308W.
    GPM.
    dannyb and shananah like this.

  8. #8
    Member
    Join Date
    Feb 2014
    Location
    Hawkes Bay
    Posts
    2,474
    The load data for .308W on the ADI site does not show any 2209 loads.
    It's basically too slow burning, its 2208 brother being far more suitable
    Nugget connaisseur and dannyb like this.

  9. #9
    Member
    Join Date
    Jul 2012
    Location
    North Shore Auck
    Posts
    628
    If you are set on using 2209 then be prepared for reduced performance , all you need to do is use the data on the ADI site for the .307

  10. #10
    The Original Striker
    Join Date
    Dec 2011
    Location
    waikato
    Posts
    718
    I use it for 200 grainers and higher in .308 and have done for years, long barrels are key I've found
    I used the minimum IMR4350 data from the Nosler manual and worked up as per normal pressure signs
    Bigger Better Faster Stronger
    Handle the Jandle, or get off the Beach

    The Original Striker

  11. #11
    Member
    Join Date
    Apr 2018
    Location
    auck
    Posts
    202
    thanks for the infos, had been loading the 270 but this round is not so friendly to my shoulder, thinking of switching to a more gentle round like the 308, will be nice if i could use the 2209.

  12. #12
    Member
    Join Date
    Jan 2021
    Location
    Kerikeri
    Posts
    305
    @holdover. Not a good idea. Go 2208 or even better 2206H. If you want some 2208 I'll swap 500 gram for same quantity of 2209. My young fellah lives in AK so no drama. Your call.
    Butch73 and shananah like this.

 

 

Similar Threads

  1. AR2209 at GC
    By Jhon in forum Reloading and Ballistics
    Replies: 0
    Last Post: 22-02-2022, 09:33 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!