Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 21
Like Tree4Likes

Thread: Bright shiny ring round primer

  1. #1
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,366

    Bright shiny ring round primer

    Never come across this before my creedmoor is Leaving a strange ring between the primer pocket and the head stamp the hole way round
    Done it since new with factory ammunition and every reload from mild-hot
    Comes off in the tumbler but is it anything to Worry about (@flyblowen) dose yours do this

    Name:  7DE45962-50D5-4C5F-82D4-DC1C54E853B5.jpeg
Views: 541
Size:  194.3 KB

  2. #2
    Member spada's Avatar
    Join Date
    Oct 2012
    Location
    Christchurch
    Posts
    204
    I reload 6.5CM but in Hornady and starline brass and have not come across that. ( I've had some warm loads too)
    Hard to say from the pic but it looks like a deformation in the brass.
    Are you sure it comes out in the tumbler or is it in decapping/resizing?

    If it is a deformation I'd be a bit concerned on pressure signs / bolt face trueing.

    Some of the other more experienced reloaders will have the answer I'm sure

  3. #3
    Bos
    Bos is offline
    Member
    Join Date
    May 2017
    Location
    Blenheim
    Posts
    924
    Could be a few reasons if they were handloads so 1st off Id try some minimum charge loads to eliminate the pressure factor. With factory ammo Id try another brand and see what happens. Other than that Id talk to a reputable gunsmith about head-space or other mechanical issues.

  4. #4
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,366
    Load Pictured is Minimum book charge
    But it does it with factory ammunition aswell

  5. #5
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,366

  6. #6
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    Check the bolt face there could be something rubbing on the case, it doesn't look like the ejector is doing it, there are no other pressure signs
    find a gunsmith that can square up the bolt face, Try Dave on 0212668527 he does all my gun plumbing.
    tanqueray likes this.

  7. #7
    Member
    Join Date
    Nov 2014
    Location
    Central Otago
    Posts
    2,217
    Pressure indicators appear to be normal. I would be looking closely at the bolt face for roughness etc. If that needs to be refaced then the barrel would need to be set back to maintain headspace.

  8. #8
    Member Cordite's Avatar
    Join Date
    May 2017
    Location
    NZ Mainland (Dunedin)
    Posts
    5,478
    Put it into the fireplace, maybe there will be some writing appearing.

    But seriously, this thread needs a picture of the bolt face, very interested.

  9. #9
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,366
    I hear you has a Definite ring that matches the one on the brass
    Just cleaned a bunch of brass off the bolt face aswell
    Name:  542FFF75-1FA6-4570-BCBF-04E823EBE30F.jpeg
Views: 439
Size:  336.3 KB

    The rifle is only 140 rounds old so I’ll take it back next week and see what they say
    Cordite likes this.

  10. #10
    Gone but not forgotten
    Join Date
    Dec 2011
    Location
    Kaukapakapa
    Posts
    448
    Quote Originally Posted by rambo-6mmrem View Post
    Il
    The rifle is only 140 rounds old so ill take it back next week and see what they say
    Shoulda got a sako in 260 Rem 👌😂
    Moa Hunter likes this.

  11. #11
    Member
    Join Date
    Jul 2012
    Location
    Tauranga
    Posts
    2,456
    Is it a Tikka?
    The photo isnt that sharp to me but my guess ( and thats all it is ) is that your plunger is giving a false pressure sign.
    ( plunger on bolt face is holding too tightly so as you rotate ( cam ) the bolt it scores the case head )

    My T3 does this but once I figured it out I was happy.
    10-Ring likes this.

  12. #12
    Member
    Join Date
    Nov 2014
    Location
    Central Otago
    Posts
    2,217
    The ejector plunger should be removed and polished, and from all the small fragments I suspect there are light burrs on the edge of the ejector hole and possibly the edge of the extractor slot. An easy fix if you feel like it but nothing to worry about if you wish to leave it alone and allow it to wear in with time.

  13. #13
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,366
    Nope howa

  14. #14
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,366
    Quote Originally Posted by gundoc View Post
    The ejector plunger should be removed and polished, and from all the small fragments I suspect there are light burrs on the edge of the ejector hole and possibly the edge of the extractor slot. An easy fix if you feel like it but nothing to worry about if you wish to leave it alone and allow it to wear in with time.
    Cheers gundoc

  15. #15
    Member
    Join Date
    Jan 2018
    Location
    Christchurch
    Posts
    658
    Both mine and at least one of @PommyMcPomFace's Howa do a similar thing. Doesn't do it the whole way around as this one appears to though.

 

 

Similar Threads

  1. Small primer vs large primer brass in 308
    By Cowboy06 in forum Reloading and Ballistics
    Replies: 5
    Last Post: 02-12-2017, 09:57 AM
  2. Ohh Shiny
    By James J. in forum Hunting
    Replies: 9
    Last Post: 20-05-2014, 12:19 AM
  3. Ma new shiny thang just arrived!
    By Proneshooter in forum Gear and Equipment
    Replies: 8
    Last Post: 08-05-2014, 04:04 PM
  4. My new spotlights a bit bright for the 22mag?
    By dairyhunter in forum Firearms, Optics and Accessories
    Replies: 9
    Last Post: 27-04-2013, 12:33 PM
  5. magnum primer v large rifle primer
    By mucko in forum Reloading and Ballistics
    Replies: 19
    Last Post: 17-01-2013, 09:32 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!