Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Delta ZeroPak


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 25
Like Tree16Likes

Thread: Bushing dies

  1. #1
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477

    Bushing dies

    I don't understand the concept/ how to use etc , could some one school me on these please.
    Are they better than standard, better than a lee Collect neck die?
    Thanks.
    Quis custodiet ipsos custodes?

  2. #2
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Dunno if they're better than anything else but they are basically a normal shoulder bump die that allow you to size the neck to a specific size via various sized bushings.
    Which in turn is neck tension on a specific projectile.
    The die will not touch the neck without a bushing in it, just bump the shoulder if setup to do so.

    Your normal full length die will size the neck the same on every brass projectile combo.

    I use them and like them. Really good for reducing ES of certain combos.

    But I have had just as good of results with normal dies.
    Never used a collet die.



    Sent from my SM-G965F using Tapatalk
    Last edited by R93; 09-01-2019 at 07:34 PM.
    jakewire and planenutz like this.
    Do what ya want! Ya will anyway.

  3. #3
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Cheers.I guess what I'm not understanding is why there is a need to size the neck to a specific size instead of just a standard resize?
    and how do you know that you want a specific size?
    Run out etc maybe?
    Quis custodiet ipsos custodes?

  4. #4
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by jakewire View Post
    Cheers.I guess what I'm not understanding is why there is a need to size the neck to a specific size instead of just a standard resize?
    and how do you know that you want a specific size?
    Run out etc maybe?
    Theory is to seat a projectile and measure the neck.
    Whatever that measurement is get a bushing that will size the neck 2 thou less.
    For example my 260 is .294 with projectile seated. So a 292 will theoretically give me 2 thou tension for that specific brass projectile combo.

    I use 4 thou on one cartridge and still get excellent ES

    As I said normal dies can be perfect.
    For hunting ammo used within normal ranges I wouldn't bother with bushing dies.



    Sent from my SM-G965F using Tapatalk
    jakewire likes this.
    Do what ya want! Ya will anyway.

  5. #5
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,456
    and if you neck turn, you need the ability to alter the dia of the part of the die that sizes the neck, as a standard FL die often wont be able to size a piece of neck turned brass enough to get enough neck tension.
    7mmsaum and R93 like this.

  6. #6
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Fuck Sake, just when after 10 yrs I thought I had this reloading shit sorted.
    Damn.
    Thanks though.
    7mmsaum, madjon_, R93 and 1 others like this.
    Quis custodiet ipsos custodes?

  7. #7
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by jakewire View Post
    Fuck Sake, just when after 10 yrs I thought I had this reloading shit sorted.
    Damn.
    Thanks though.
    We should all still be learning mate.


    Sent from my SM-G965F using Tapatalk
    chainsaw and Max Headroom like this.
    Do what ya want! Ya will anyway.

  8. #8
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    Quote Originally Posted by jakewire View Post
    Fuck Sake, just when after 10 yrs I thought I had this reloading shit sorted.
    Damn.
    Thanks though.
    Just to fuck with your head a bit more standard dies size the neck to much over working the brass,
    also the expander button can stretch the neck out of square, Redding S dies give you the option of using the button or not
    A bit more shit to sort, I shoot mainly cast lead bullets and use a Lyman M die to expand my case necks it pushes down so does not
    stretch the case neck I use it when loading jacketed bullets as well none of my full length dies have expander buttons,

    You can load perfectly good match grade ammo with standard die sets all the fancy gear may make it more consistent and a bit easier
    to assemble your ammo but is it worth the money
    jakewire likes this.

  9. #9
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,258
    I'm the same as @R93 on my 260 but I don't use the internal expander button, for the reasons shooternz mentions. Not using the expander also saves having to do inside neck lube. For hunting and plinking loads, a collet die will give the same results.

  10. #10
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by Mathias View Post
    I'm the same as @R93 on my 260 but I don't use the internal expander button, for the reasons shooternz mentions. Not using the expander also saves having to do inside neck lube. For hunting and plinking loads, a collet die will give the same results.
    I haven't used an expander button on any rifle loads for years.

    Maybe once in a while on a dented neck I think I can salvage.

    That's another reason I like redding dies as they have a cap for the decapping pin that will not touch the sides as in my pick above.

    Sent from my SM-G965F using Tapatalk
    Do what ya want! Ya will anyway.

  11. #11
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,258
    Quote Originally Posted by R93 View Post
    I haven't used an expander button on any rifle loads for years.

    Maybe once in a while on a dented neck I think I can salvage.

    That's another reason I like redding dies as they have a cap for the decapping pin that will not touch the sides as in my pick above.

    Sent from my SM-G965F using Tapatalk
    Ahuh, I thought that capping pin retainer looked larger as in a resizer button
    Kiwi Greg likes this.

  12. #12
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by Mathias View Post
    Ahuh, I thought that capping pin retainer looked larger as in a resizer button
    Sorry mate, you're right. I just checked. Has the button on it. Haven't loaded any 260 for ages.

    Now I can't find my friggen knurled cap

    Sent from my SM-G965F using Tapatalk
    Do what ya want! Ya will anyway.

  13. #13
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    2,939
    @jakewire Redding do two types of bushing dies, a plain neck one or a full length one which allows you to bump the shoulder back, which you will eventually need to do if just using the neck one (back thru a normal full length die or a body die) the advantage of the neck one for me is it speeds the reloading process up, a lot less faffing around prepping & cleaning brass!

    If you really want to have sleepless nights, get a concentricity gauge
    Shut up, get out & start pushing!

  14. #14
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    No don't useless thing makes you wonder where the hell you went wrong

  15. #15
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Get a forster bonanza press, redding dies and you shouldn't ever have a concerntricity issue if using good brass to start with.
    Die floats, case floats in case holder.

    Only time I ever had an issue was with a bad die after annealing.


    Sent from my SM-G965F using Tapatalk
    Do what ya want! Ya will anyway.

 

 

Similar Threads

  1. Type S Bushing dies
    By 25/08IMP in forum Reloading and Ballistics
    Replies: 14
    Last Post: 07-08-2018, 05:32 PM
  2. Bushing dies opinions/experiances
    By Beavis in forum Reloading and Ballistics
    Replies: 12
    Last Post: 05-01-2018, 01:55 PM
  3. Selecting bushing type dies and neck tension
    By LittleDave in forum Reloading and Ballistics
    Replies: 18
    Last Post: 03-07-2017, 10:38 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!