Case head separation imminent
Padox, was the first firing as factory ammo in the same rifle as the next one or two firings?
I’ve had case separations after two firings in my .30/06. First firing in a different rifle to the second. Both same make but obviously dimensions in the chamber and brass flowed forward.
Also had a couple in my .35 w as a result of pushing the shoulder back a bit to far when sizing .30/06 brass up for the first firing.
In a R700 the gas vents through the hole in the receiver and some via the magazine. Not a issue if hand is away from the area.
https://uploads.tapatalk-cdn.com/202...04ee81e9c4.jpg
Sent from my iPhone using Tapatalk