Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25
Like Tree6Likes

Thread: Cast loads in 30-30

  1. #16
    Member
    Join Date
    Jul 2016
    Location
    Auckland
    Posts
    33
    Name:  IMG_3202.JPG
Views: 301
Size:  233.5 KB
    I managed to get out to shoot some of my subsonic cast reloads today with some interesting results. The photo is of one captured in a milk bottle line up, from inside the 5th (2L) milk bottle. Speed 1120fps(just supersonic), 7.5 gr Trailboss, expanded to .453 dia., shed weight from 151gr to 97.3 gr

    Todays Results: (all Trail boss @50M, COAL 2.450, Ave speed of 3 shot groups, 1.5-4x Leupold scope set@ 4x, dark marlin 30-30 DPT suppressor)

    6.5gr 1042 fps, 50mm group
    6.8gr 1070 fps, 35mm group
    7.0gr 1098 fps ( one round supersonic) 50 mm group
    7.5gr 1143 fps (all supersonic) 25mm group
    Also shop a group of the longer rounds mentioned earlier that jammed into the lands somewhat COAL 2.500, 7.0 gr TB ave speed 1084, group size 50 mm. Effectively slightly slower, which was a bit unexpected as I would have thought there might have been a pressure increase.
    Grouping was a bit average really but might be requiring some more work on my part and I wasn't set up on my normal(better) spot. I might play a bit more with those loaded at 6.5-6.8gr to see if I can improve accuracy. Interesting to compare with jacketed loads shot last week ( berry bullets 150 gr) which when loaded at 7.5gr TB were consistantly subsonic(ave 1060fps).
    dannyb and Nathanfish like this.

  2. #17
    Member
    Join Date
    Jul 2019
    Location
    Auckland
    Posts
    441
    Great data man. Thanks that's going to be useful going forward. My barrel is an inch shorter than yours so I'm interested to see what my speeds are. Cheers

  3. #18
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    I am thinking about getting a mould designed specifically for the 30/30 one on the short list is 170-180 grains not sure if there is a HP option
    The 151HP is designed for the .308 which the chamber is cut for the 168 gr Sierra MK in most cases in mine the 155 gr PALMA bullet, that is why it is a bit chubby
    up front any one interested in a 30/30 mould let me know
    ebee likes this.

  4. #19
    Member
    Join Date
    Jul 2016
    Location
    Auckland
    Posts
    33
    yes is be keen for sure!

  5. #20
    Member Marty Henry's Avatar
    Join Date
    Oct 2014
    Location
    Tararua
    Posts
    6,632
    Good results there, personally I'm not a fan of trailboss, it has its uses but you seem to get some wide variations in speed with it. Admittedly I've never chased subsonic loads but the 14 to 1600fps region is where I "aim" for. You might like to consider a light charge of a shotgun or pistol powder if you are after better. Most cast bullet shooters will probably say if asked for a starting load in any calibre 10 grains of unique or equivalent ap70n

  6. #21
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    You are right Trail Boss may not be the best powder for sub sonic loads But it is the easiest to get good results with, powders like Red dot AS30 N310 and other fast pistol / shot gun powders
    can give better accuracy but are a lot harder to work with needing fillers to keep the small amount of powder against the flash hole, Trail Boss does not need that much fussing about wth,
    Another good load besides 10 grs Unique is 13 grs Red Dot if you Google The Load it will pop up,
    .30 cal cast bullets generally have their best accuracy between 1800 and 1900 fps using the soft lead that I use or wheel weights any harder won't expand or will shatter.
    Marty Henry and ebee like this.

  7. #22
    Member Marty Henry's Avatar
    Join Date
    Oct 2014
    Location
    Tararua
    Posts
    6,632
    Truth be told I used to use fillers but stopped years ago, never have had a problem with ignition or consistent velocity. Only thing I still fill for is light loads in black powder numbers and I've discovered rolled oats to be about the best,

 

 

Similar Threads

  1. 9.3 cast bullets
    By Marty Henry in forum Reloading and Ballistics
    Replies: 13
    Last Post: 01-11-2017, 06:04 AM
  2. Cast bullet help
    By PerazziSC3 in forum Reloading and Ballistics
    Replies: 30
    Last Post: 05-01-2014, 04:25 PM
  3. What sort of cast do you want from your dog...
    By EeeBees in forum Trial, Pedigree and Bird Dogs
    Replies: 31
    Last Post: 25-12-2013, 10:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!