Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

ZeroPak Delta


User Tag List

+ Reply to Thread
Results 1 to 9 of 9

Thread: CZ 527 223, 1:9

  1. #1
    Banned
    Join Date
    Jul 2016
    Location
    Tauranga
    Posts
    73

    Question CZ 527 223, 1:9

    Hey all. Anyone running a CZ 527 in 223 with 1:9 twist?
    What's working for you re projectile/powder combo?

    Cheers
    The Creeper

  2. #2
    Member viper's Avatar
    Join Date
    Feb 2015
    Location
    Rabbitvegas
    Posts
    2,605
    I don't have it anymore and was using it only for Varmint shooting but found either BM2 or A2206H both to be excellent consistent powders that gave good FPS.
    CCI BR small primers and I ran V Max projectiles from 53 gr to 55 gr with very small grouping.
    I did shoot up to 62 gr and it was still very good grouping but lacked the splat effect on Rabbits.
    If you are in Tauranga ( I was ) then Stacy at hamill's is good to deal with and has a very good reloading knowledge.

  3. #3
    Member
    Join Date
    Mar 2016
    Location
    Timaru
    Posts
    31
    I have one but 1:12. Best combo I've found so far is Sierra 55gr SBT projectiles seated to 0.005" from the lands and 23.5gr N133. Get about 20mm 5 shot groups at 100m.

  4. #4
    Member jim160's Avatar
    Join Date
    Jun 2012
    Location
    Wellington
    Posts
    2,972
    I have one as well. Will check twist rate tomorrow and let you know.

  5. #5
    Member
    Join Date
    May 2015
    Location
    Rolleston
    Posts
    559
    Mines a 1:12, and so far 50gr Vmax over ar2206h has been miles better than anything else. Will try some BM8208 soon though to see if it helps.

    Bedding the front recoil lug didn’t hurt either, and very easy to do. Mine was way oversized in the in letting from the factory.

  6. #6
    Member
    Join Date
    Mar 2016
    Location
    Timaru
    Posts
    31
    Quote Originally Posted by 7x64 View Post
    Mines a 1:12, and so far 50gr Vmax over ar2206h has been miles better than anything else. Will try some BM8208 soon though to see if it helps.

    Bedding the front recoil lug didn’t hurt either, and very easy to do. Mine was way oversized in the in letting from the factory.
    I found the same with factory ammo with the 50gr V-Max as well, but so far havent been able to find the sweet spot with my reloading. Did you rifle have any factory bedding? Mine has a blob of bedding compound thats had the recoil lug pressed into it. Not exactly pretty

  7. #7
    Member
    Join Date
    May 2015
    Location
    Rolleston
    Posts
    559
    Quote Originally Posted by AlexW View Post
    I found the same with factory ammo with the 50gr V-Max as well, but so far havent been able to find the sweet spot with my reloading. Did you rifle have any factory bedding? Mine has a blob of bedding compound thats had the recoil lug pressed into it. Not exactly pretty
    No, no bedding at all, just inletted. I’m struggling a little too beside my vmax load. I can dig it out if you want to try it?

  8. #8
    Banned
    Join Date
    Jul 2016
    Location
    Tauranga
    Posts
    73
    What group size you guys been getting

  9. #9
    Member
    Join Date
    Mar 2016
    Location
    Timaru
    Posts
    31
    Name:  20171209_121201.jpg
Views: 404
Size:  2.43 MB

    5 shots at 100m. The size of the grid is 1 inch.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!