Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Delta


User Tag List

+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 45
Like Tree43Likes

Thread: Dented Shoulders... Bin it?

  1. #16
    Member 300_BLK's Avatar
    Join Date
    Aug 2014
    Location
    NZ
    Posts
    3,590
    Yeah @Dorkus bin the gun and get a proper calibre

    Nah I use spray on lube and sometimes go too hard out and all the necks get that. They are sweet and will fireform out.

    This can also happen if you get buildup of lube in your sizer over time so usually strip and assemble with a wipe and some brake clean... should be able to snake some from work
    Dorkus and Hunter_killer like this.
    Warm Barrels!

  2. #17
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    DO NOT TRY TO REMOVE LIVE PRIMER this is covered in every manual for good reason....bit like juggling chainsaw...yeah you might get away with it 99 times but the 100th will bite you in the arse big time...Im a tight wad scruge Mc Duck but at 7c per primer why would you risk it????
    just chamber the empty case with projectile removed and fire the primer off...dont poke barrel into your best polarfleece shirt to muffle the noise or it will have burn holes in it ( dont ask how I know this)
    better to be safe than sorry.

  3. #18
    #KnowsFuckAll Dorkus's Avatar
    Join Date
    Jul 2015
    Location
    Mangawhai
    Posts
    1,310
    Quote Originally Posted by 300_BLK View Post
    Yeah @Dorkus bin the gun and get a proper calibre

    Nah I use spray on lube and sometimes go too hard out and all the necks get that. They are sweet and will fireform out.

    This can also happen if you get buildup of lube in your sizer over time so usually strip and assemble with a wipe and some brake clean... should be able to snake some from work
    I'm not binning my pig. Just found a recipe that shoots, need to chrony it but should retain killing power to 350yds with a 150gn projectile.
    "I heard Jesus did cocaine on a night out. Eyes wide-open, dialated, but he's fine now. And if his father ever finds out, then he'd probably knock his lights out...
    Gets a little messy in heaven "
    - Venbee

  4. #19
    Member 300_BLK's Avatar
    Join Date
    Aug 2014
    Location
    NZ
    Posts
    3,590
    Labradar arriving this week.

    PM me and we can sort you out bro.
    Dorkus likes this.
    Warm Barrels!

  5. #20
    Member
    Join Date
    Mar 2014
    Location
    New Plymouth
    Posts
    1,739
    Quote Originally Posted by Dorkus View Post
    since I'm asking questions... I've got a couple of rounds that don't have any powder in (apparently drinking a box while reloading has its perils). If I pull the projectiles can I pop the primers out with the FL die/recapping pin? or will it blow up in my face? I quite like my face.
    Just remove you deprimer pin and resize again without punching out the primer and you are ready to go otherwise your neck will be too loose

    Sent from my SM-G900I using Tapatalk

  6. #21
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    Quote Originally Posted by 25/08IMP View Post
    Just remove you deprimer pin and resize again without punching out the primer and you are ready to go otherwise your neck will be too loose

    Sent from my SM-G900I using Tapatalk

    feel free to correct me if Im wrong but by doing that your neck will be too tight as button on decapping rod wont come out to size it back up to size?????

  7. #22
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    Quote Originally Posted by Micky Duck View Post
    feel free to correct me if Im wrong but by doing that your neck will be too tight as button on decapping rod wont come out to size it back up to size?????
    Feel corrected then
    He said only remove the decapping pin, not the button. That applies only if the brand of die allows that and the decapping pin is not integral with the button.

    I use this method all the time when load developing when I start firing a load and know straight away it is not worth continuing. Leaves me with rounds to pull apart. I always resize the neck to re-establish neck tension b4 loading again.
    Last edited by zimmer; 16-07-2017 at 08:55 PM.
    veitnamcam and Micky Duck like this.

  8. #23
    Member
    Join Date
    Jul 2012
    Location
    Tauranga
    Posts
    2,456
    Depends on the style of die @Micky Duck some ( most but not lee ) you can remove just the pin and leave the expander button on or another scenario as you are really only resizing the case mouth is to wind the decapping rod up so it doesnt touch the primer.
    zimmer and Micky Duck like this.

  9. #24
    Member
    Join Date
    Mar 2014
    Location
    New Plymouth
    Posts
    1,739
    Quote Originally Posted by Micky Duck View Post
    feel free to correct me if Im wrong but by doing that your neck will be too tight as button on decapping rod wont come out to size it back up to size?????
    It depends on your brand of dies mine are redding so you can remove the decapping pin and still leave the sizing button in so you are sizing and not removing the primer.

    Sent from my SM-G900I using Tapatalk
    Gibo likes this.

  10. #25
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    ok ok ok I stand corrected lmao.
    Shootm, veitnamcam and zimmer like this.

  11. #26
    Member Beetroot's Avatar
    Join Date
    Apr 2013
    Location
    Morrinsville
    Posts
    2,800
    My redding FL dies do the same if I'm not careful with my 260 brass.
    I use a spray lube and not much, but I have to be really careful with not having too much lube. Apparently this is common with Redding dies.

    Funnily enough my Lee FL die has never dented a case.

  12. #27
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,165
    Quote Originally Posted by Beetroot View Post
    My redding FL dies do the same if I'm not careful with my 260 brass.
    I use a spray lube and not much, but I have to be really careful with not having too much lube. Apparently this is common with Redding dies.

    Funnily enough my Lee FL die has never dented a case.
    Its not common with redding dies and their lube(wax)

  13. #28
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    Quote Originally Posted by Beetroot View Post
    My redding FL dies do the same if I'm not careful with my 260 brass.
    I use a spray lube and not much, but I have to be really careful with not having too much lube. Apparently this is common with Redding dies.

    Funnily enough my Lee FL die has never dented a case.
    could be because they have a wee hole of about 1mm dia to allow excess to get out.... I dont get issue with my lee or hornady sets either but the redding set I do.

  14. #29
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,165
    Sounds like you lads need to learn how to use em or give that crappy redding shit to me

  15. #30
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    funnily enough since I went back to lubing cases the way I was first shown 30 something years ago issues have all but dissapeared....vasoline on fingers give case a whirl between them and call it good....... now am I just the only one or does the very mention of vaso bring back memories of that puberty blues scene in back of wagon with guy diving into tool box????

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!