Hi team.....I can get my hands on this powder and see that it's mentioned with other types on the .260 Lee pacesetter die sets.
Have any of you .260 guys used H 4350? if so would like to hear what you think.
Cheers.:)
Printable View
Hi team.....I can get my hands on this powder and see that it's mentioned with other types on the .260 Lee pacesetter die sets.
Have any of you .260 guys used H 4350? if so would like to hear what you think.
Cheers.:)
H4350 is the exact same powder as ADI AR2209 made by the same company. So yeah, lots of guys will have used it in the 6.5s.
I use it in .243Win and 6.5 Creedmoor. My observation is that there has been a noticeable change in velocity (up) between bottles which have come from different lots. So not the most consistent but then not sure which powders could claim to be the exact same from lot to lot.
H4350 is the standard goto powder for 6.5 Creedmoor the world over, can’t speak so much for .260 Rem but they are so similar that I’d be surprised if it wasn’t in the top3 powders used for this cartridge. My mates in Aus who shoot .260 use 2209.
It gives you a nice full case and an easy 2750fps+ so all good. You can’t really go wrong with it IMO.
yeap 2209. Know heaps of guys shooting 260 with it.Attachment 89286
Lookin damn good so far, appreciate this :thumbsup:
I found i got far better velocity out of H414 in my 260
Yep I prefer h414 (Winchester 760) same powder
I have tried 2209 and 2208 in my 260 but settled with ether h414 or 760
Accurate as in my rifle
123gn sst
Attachment 89295
W760 for my 260AI as well. Thought I tried everything and someone on here suggested W760... Thanks heaps by the way [emoji106]
I have to say I was surprised but it improved the results I got out of my rifle across the board.
Sent from my SM-G965F using Tapatalk
Yip use 2209 in mine. Pretty tame load doing 2900 :thumbsup:
Attachment 89306
I'm not too fussed on the top speed thing as I'm chasing accuracy... a gnats whisker over 18'' barrel.
Tossing between 2209 and H414 :)
Mines 18 inches mate
Accuracy beats speed any day of the week
Aslong as you have useable speed for me that’s over 2700 in a 260
Haven’t cronyed my load yet but should be easy over that mark
Of coarse if you can get speed and accuracy perfect
But if a compromise is to be made id rather drop the speed slightly and have it shooting good
no brainer really ^^
Doinit, I reckon its one of things that you need to test. I get groups like the ones above in my 6.5CM with 2209, but on my to do list this winter is to try a spherical powder anyway, just to see, most likely H414 / Win 760.
My Aussie mate uses both AR2209 and H414 in his .260 with Lapua Scenars and Sierra TMKs and gets outstanding results with both. At the end of the day its down to your rifle and your reloading skills. What someone else gets is a guide only, you may or may not get the same results.
There’s a thread on another forum I’m following where the one shooter who has the exact rifle as me was spinning his wheels trying to get fairly standard loads posted by others to work as well with his rifle. He chased velocity from the get go and started quite far up the powder weight scale, he just got frustrated. Probably deserved it too. In the end, he restarted, at the bottom of the scale, and found a perfect accuracy node right in the middle of the book range, at a lot lower powder weight than others using the same components in the same rifle.
So if I were you, I’d do the basics right, with whatever powder you can get reliably. If it works out then great, stick there and buy enough powder from the same lot to keep you in business for a nice long while. That “same lot” bit is quite important else you’ll be buggering around like me trying to work out why my pills are suddenly flying that much faster that I’m shooting over the top of them damn goats.
Yeah Flyblown ,will work up a brew that I'm happy with and leave it at that.
As long as I can pop a pill consistently into an inch at a hundy I'll be happy. Up until now that has been the norm but the loads were hot :(
and when dropping down a grain at a time accuracy declined,time for a change really. Gone are the days when my ammo arrived in 3'000 round box's :wtfsmilie:
Thanks team for the input,can make an old goat smile.
Anyone got a load for 129gn interloc with win760
i hope to in awhile frm 21inch and suppressed 260
will try Win760/H414 and 129gn interlock hoping they work with my short mag length and 1:9 twist barrel
You may think that gibbo and so do I but I know people who are all about speed and aslong as accuracy it 1.5 inch or better at 100 they couldn’t give a shitQuote:
Originally Posted by Gibo
Like the deer will notice 1-200fps I doubt it lol
I know you have told me before but what’s your recipe for your 260? How meny grains over max? Might give 2209 another go ive got some here
The speed plus accuracy in your gun it’s bloody awesome
What software is this ?Quote:
Originally Posted by blair993
It's an app called Range Buddy. Bloody good. I am a bit of a moron when it comes to working computer stuff but this isint bad at all.Quote:
Originally Posted by 300_BLK
Take a pic of your group and have a known size in the pic and it all works from that.
Sent from my SM-G965F using Tapatalk
Il have a look tonight, its been so long since i reloaded anything! Must have done too many last batch :ORLY:Quote:
Originally Posted by rambo-6mmrem
45
You’re using 130vld hunting eh @Gibo
Yeah man love em
