help with .308 brass sizing in southland

Hi you lot

I've recently bought a new 308 and have some lapua brass fired through a different rifle. The brass needs sizing to work with the new one (I'm just learning to reload and use relatively light loads and a lee loader)

would someone be able to size 50 cases? I'm based in Gore and work in Invercargill


Cheers!

I can mate but I'm Rotorua. Do you not have a full length sizing die? Have you loaded one and tried it in the breach yet and no go?


Sent from my iPhone using Tapatalk

I don't have a press at all unfortunately mate a Lee loader is just a primitive neck sizing set up, Will see if there's anyone else around these ways keen to help first but thanks for the offer!

I can help but chch way tho
We are getting closer:thumbsup:

Same here....I am a bit closer in Nelson but still miles away....best if you can to see it being done/do it yourself, someone local must reload the best caliber in the world surely!

Def the best all round calibre for NZ mixed conditions, so long as you use the right bullet for the animal/range.
Unfortunately too far from you in the 'Rapa.

I can't help up here. But might be time to buy a cheap press.

On the island but reloading stuff is in Canterbury.... @perrissciba maybe available (hate trying to tag is name)

Quote:

---

Originally Posted by kiwi303

Hi you lot

I've recently bought a new 308 and have some lapua brass fired through a different rifle. The brass needs sizing to work with the new one (I'm just learning to reload and use relatively light loads and a lee loader)

would someone be able to size 50 cases? I'm based in Gore and work in Invercargill


Cheers!

---

I can full length resize it for you for free if thats of any help to you

Just send me the brass and include a self addressed postage bag.

Pack it tightly so it does not rattle.

Pm for name & address

Quote:

---

Originally Posted by 7mmsaum

I can full length resize it for you for free if thats of any help to you

Just send me the brass and include a self addressed postage bag.

Pack it tightly so it does not rattle.

Pm for name & address

---

Legend :thumbsup:

Thanks you lot! really appreciate it, will PM you 7mm SAUM.

A cheap press is definitely in the pipeline one day soon

@deepsouthaussie

I'm still using my old neighbours press.. Still slowly accumulating all my own kit. Almost there @Gibo .. Just need press, case prep/trim tools and verniers to go...

Sent from my ALE-L02 using Tapatalk

You could try the local full bore club theys all shoot 308's

Quote:

---

Originally Posted by kiwi303

Hi you lot

I've recently bought a new 308 and have some lapua brass fired through a different rifle. The brass needs sizing to work with the new one (I'm just learning to reload and use relatively light loads and a lee loader)

would someone be able to size 50 cases? I'm based in Gore and work in Invercargill


Cheers!

---

Do you have the dies??? If yes i can resize for you… for free too!!! LOL!

has been sent off to 7mmSAUM already but thanks for the offer mate!