Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

ZeroPak Alpine


User Tag List

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 15 of 31
Like Tree27Likes

Thread: Hornady 150sst load-30cal

  1. #1
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    2,929

    Hornady 150sst load-30cal

    Hey guys wanting to get help with a load for the above projectiles. Have an accurate 165 sierra HPBT/ADI powder load but would like more speed as am only getting around 2600fps currently. Gun is a tikka 308 with a 16.5" barrel and a hardy supp.
    Cheers guys!
    Feral likes this.

  2. #2
    Member Feral's Avatar
    Join Date
    Feb 2014
    Location
    Blenheim
    Posts
    648
    Quote Originally Posted by superdiver View Post
    Hey guys wanting to get help with a load for the above projectiles. Have an accurate 165 sierra HPBT/ADI powder load but would like more speed as am only getting around 2600fps currently. Gun is a tikka 308 with a 16.5" barrel and a hardy supp.
    Cheers guys!
    Mate I went down exactly the same journey... I'm shooting 150gr SST, 44.5gr 2206h from my 20" barrel plus can. Not quite getting a complete burn but close to it and under MOA. Rem700. 2690-2700fps. Not super fast but a good balanced load that is hitting gongs out to 600.

    Remember too that you've accepted some velocity loss with a shorter barrel.

    Sent from my SM-G935F using Tapatalk
    Boaraxa likes this.

  3. #3
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,164
    What makes you say you are not getting a complete burn @Feral

  4. #4
    Member Feral's Avatar
    Join Date
    Feb 2014
    Location
    Blenheim
    Posts
    648
    Quote Originally Posted by Gibo View Post
    What makes you say you are not getting a complete burn @Feral
    I ran the load thru quikshot a while back. I forget the specifics but recall it wasn't a full burn.

    Sent from my SM-G935F using Tapatalk

  5. #5
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,164
    So no powder left in the case though? Or did it roll out the end?
    Boaraxa and Huk like this.

  6. #6
    Member
    Join Date
    Jul 2013
    Location
    Godzone, South Island
    Posts
    1,705
    Easiest way is to shoot it in the dark, if you see flames etc then its not a complete burn.

  7. #7
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    2,929
    Yeah am aware of loss of speed but know of people getting 2900-3000fps with 125gr loads and 16" barrels so figured i could get a 150 with a good BC up around 2700-2800fps conaidering factory for those loads get 3000fps out of a 24" barrel in a 308.
    Know it is not just about speed and am happy with my load for bush hunting but would be nice to crank something down the barrel that will give me a bit more oomph at range.
    Feral likes this.

  8. #8
    Member 300CALMAN's Avatar
    Join Date
    Dec 2014
    Location
    NZISTAN
    Posts
    5,215
    I shoot the same 150 grain SST projectile out of a 19" Tikka and get about 2700 max using 2208. 2600 with a 16.5" barrel sounds about right.

    I had some over cooked hand loads with 125 grain noslers doing about 2900 so about right. I'ts a 20% increase in bullet weight from the 125 to the 150 so a lot more pressure.
    Pengy likes this.

  9. #9
    Member 300CALMAN's Avatar
    Join Date
    Dec 2014
    Location
    NZISTAN
    Posts
    5,215
    Blowing your face off for a few extra fps is just not worth it.
    Pengy, Feral, PERRISCICABA and 3 others like this.

  10. #10
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Norf
    Posts
    5,430
    Out of 24in bbl pushing 150ssts with 2208 was getting 2920 fps. ADI says max 2950.
    16 in bbl u could get 2600 - 2700. I’m always a bit wary of warp speeds quoted by some people - they must have “optimistic “ chronys
    Feral likes this.

  11. #11
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,164
    I get 2650 with 165 BT out of 16, used to get 2700 with 17 inches. 44.5 of 2206H, safe af and validated at ranges not chronied.
    veitnamcam, Cartman and Huk like this.

  12. #12
    Member deer243's Avatar
    Join Date
    Oct 2012
    Location
    nelson
    Posts
    1,144
    Im sure the powder Hornady use with the super perforance ammo is pretty high tech compared to general powder. There stated speed in 150sst sp factory is 3000 fps in 24 inch. In my 24 inch 308 it was going 2995fps so was pretty much stated. Out of a 16.5 inch you going to lose at least 225 fps from a 24 so getting around 2700 out of a 16 is about right

  13. #13
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    2,929
    sweet as will most likely stick to my sierras then and maybe a LR rifle is in the mix. Had a sika stag and hind on a slip a few days back at just over 500m and felt very undergunned even with my strelok app giving me an aim point and telling me i would be holding more than enough energy at that range. Maybe a scope with slightly more mag would help...running a 2.5-8 haha
    Danny likes this.

  14. #14
    Member
    Join Date
    Jul 2015
    Location
    Bay of Plenty
    Posts
    167
    I used ADI 2208, 45g, Lapua and federal for circa 2650fps with the 150 SST was very accurate..then I realized I shoot most of my deer under 20m so just use 165 Speers now going fast enough to break necks.
    Gibo likes this.

  15. #15
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,833
    I had 155's doing a hair under 2700 with a 16" Remington
    nor-west likes this.

 

 

Similar Threads

  1. WTB 30 cal 150SST's
    By chainsaw in forum Projectile and Factory Ammo Exchange
    Replies: 0
    Last Post: 19-06-2016, 01:56 PM
  2. .224 40-50gr wanted, swap for 55gr hornady, or 150gr 30cal sst
    By 7x64 in forum Projectile and Factory Ammo Exchange
    Replies: 0
    Last Post: 14-02-2016, 04:24 PM
  3. Hornady Lock n Load AP press
    By specweapon in forum Reloading and Ballistics
    Replies: 27
    Last Post: 17-12-2015, 09:18 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!