Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Delta Terminator


User Tag List

+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Dec 2011
    Location
    Manawatu
    Posts
    34

    IMR 4166 for 308

    Hello all,
    Im looking into IMR 4166 for the 308 as I can readily get this.. Im struggling to find load data for this powder. Hodgdon site has limited data, and I can't find any other data. Is this because the powder is relatively new? Who has used this and what were the results like. Will be shooting 150 grain btsp. Thanks in advance.

  2. #2
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,669
    Quote Originally Posted by Plodalong View Post
    Hello all,
    Im looking into IMR 4166 for the 308 as I can readily get this.. Im struggling to find load data for this powder. Hodgdon site has limited data, and I can't find any other data. Is this because the powder is relatively new? Who has used this and what were the results like. Will be shooting 150 grain btsp. Thanks in advance.
    Greetings Plodalong,
    IMR4166 seems to be similar to Varget and IMR4064, perhaps a little slower. Also just a little faster than AR2206H/ H4895. I've used all these powders in the .308W with excellent results and IMR4166 should be at least as good. I've found the Hodgdon data to be excellent so it it probably all that you need. You have to really try hard to find a bad load for the .308W,
    Regards Grandpmac.

  3. #3
    JLF
    JLF is offline
    Member JLF's Avatar
    Join Date
    Dec 2021
    Location
    Alvarez (ARGENTINA)
    Posts
    157
    Giro: 1: 12.000 "
    Longitud del cañón: 24.000 "
    Longitud de la moldura : 2.005 "
    PESO DE LA BALA
    150 GR. NOS BT
    CARGA INICIAL CARGA MAXIMA
    FABRICANTE POLVO BULLET DIAM. COLUMNA GRS. VEL. (PIES / S) PRESIÓN GRS. VEL. (PIES / S) PRESIÓN
    IMR IMR 4166 0.308 " 2.800 " 43,0 2.677 47,800 PSI 48.0C 2,934 60,300 PSI
    There is still gunpowder left, the Grim Reaper can wait.

  4. #4
    Gone but not forgotten
    Join Date
    Apr 2017
    Location
    Hamilton
    Posts
    4,129
    Quote Originally Posted by grandpamac View Post
    Greetings Plodalong,
    IMR4166 seems to be similar to Varget and IMR4064, perhaps a little slower. Also just a little faster than AR2206H/ H4895. I've used all these powders in the .308W with excellent results and IMR4166 should be at least as good. I've found the Hodgdon data to be excellent so it it probably all that you need. You have to really try hard to find a bad load for the .308W,
    Regards Grandpmac.
    Yes, loads for IMR4166 look to be similar, but a little lower, than Varget/AR2208. A guy posted some loads with identical charges of 4166 and Varget (42.4 to 44.2gr of each), the 4166 had slightly higher velocities.
    https://www.tapatalk.com/groups/prac...son-t2530.html

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!