Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine ZeroPak


User Tag List

+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25
Like Tree9Likes

Thread: Installing Lyman 525 slugs into factory shotgun cartridges.

  1. #16
    Member
    Join Date
    Apr 2017
    Location
    The 'Naki
    Posts
    2,105
    This might be relevant

    https://castboolits.gunloads.com/sho...d-Substituting

    and another useful discussion

    https://castboolits.gunloads.com/sho...-NEF-UltraSLug

    there is a heap of this stuff out there...
    Last edited by Jhon; 05-09-2021 at 06:34 PM.
    I know a lot but it seems less every day...

  2. #17
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    @Kiwi Sapper...above link post #21 answers questions relevant to your 2 1/2"

  3. #18
    Member
    Join Date
    Jul 2015
    Location
    Otago
    Posts
    13
    Thanks, yes I've been reading that Web site. Very good info. I think I'll find most answers there.
    Micky Duck likes this.

  4. #19
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    the round ball bit..........yip some folks been doing it for years.......some have even used kids glass marble when things were really grim.

  5. #20
    Member
    Join Date
    Feb 2013
    Location
    Wanganui without an "h"
    Posts
    3,023
    Quote Originally Posted by gactrx View Post
    Great, any idea where I can get a roll crimper? Looks like I'll need a bench drill too.
    Thre are basically two types of roll crimper.
    The old style which bolts / screws to the workbench and is hand cranked available from Ebay. THIS is the one I have.

    https://tinyurl.com/yetaetku

    and the other type which is used in a vertical drill press........... https://tinyurl.com/5yx3jhw3

    Beavergrease has been selling them on TradeMe jeff@beavergrease.co.nz
    300CALMAN likes this.
    .

  6. #21
    Member
    Join Date
    Feb 2013
    Location
    Wanganui without an "h"
    Posts
    3,023
    Quote Originally Posted by Micky Duck View Post
    @Kiwi Sapper...above link post #21 answers questions relevant to your 2 1/2"
    Um ............Thanks, but I don't think so. No way would I be firing slugs from my 1931 Churchill.
    .

  7. #22
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    @Kiwi Sapper....I didnt suggest you were....if you go into link and onto post #20 you will see reference made to swapping components AND changing load normally ment for longer hull to shorter hull be changing amount of spacers and the corrosponding LACK OF PRESSURE CHANGE ....EG it confirms you good to go...but if you had had a look you would already know this..... main part of article is swapping shot for slugs but the off shoots with tested data are pure gold for what you were asking,why I tagged you in.

  8. #23
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    What I am saying is:

    1. ~ Yes, you can use equivalent weight lead shot load data as a starting point for loading cast lead slugs. Substituting an equal weight solid slug for the lead shot will reduce peak chamber pressure not increase it.

    2. ~ If you don’t have your own means of checking the pressure of your loads (pressure trace equipment is best but unsupported faulty chamber bulge comparison to a know pressure load will work as well) then you should direct your attention to stiffening up the wad column in order to “work up the load from the starting point” rather then increasing the powder charge or switching to a hotter primer.

    The testing I have done so far indicates that unless someone puts together something really crazy that should keep them out of trouble and allow them to build loads with decent performance. Things that would fall under “something really crazy” would be doing something like trying to force a 0.740+ diameter solid flat sided slug with no relief grooves or bands cast from pure type metal or turned on a lathe from bronze or copper rod through a standard 0.727” to 0.732” diameter shotgun bore or using a wad-column that consists of a solid ironwood 3/4” dowel turned down to 0.73” diameter that has absolutely no give to it at all (even hard nitro cards have some give to them). I’m sure that there are plenty of other “crazy” options but I can’t list them all. (As soon as you finally idiot proof something they come out with a better idiot.)

    I should note that the fastest powders I have worked with are Clays and Red Dot and usually I work with the slower burners like WSF, IMR-4756, Blue Dot, and Steel powder. I can say that my limited work with Clays and Red Dot did show that I could completely replace the cushion section of the wad with a stack of hard nitro cards using 7/8 to 1-1/8 ounce weight wad-slugs and it didn’t put me over the pressure of the original lead shot load that I used as a starting point. It would usually put me pretty close to matching it but not quite though.

    I should clarify that I haven’t done any work with the super fast burning powders that are even faster burning then Clays and Red Dot and basically just powdered dynamite namely Bullseye and AA#2 which are pretty much the two fastest burning powders available. It’s on my to do list for spring just to confirm the theory at the extreme end of the spectrum and not that I think there would be much sense in loading slugs with those powders since Clays an Red Dot are already a little too fast burning for building slug loads for anything other then plinking loads or three gun competition type stuff.

    Now it is true that I was stiffening wad columns before I had pressure trace equipment. I was using the unsupported faulty chamber pressure bulge technique and an old Hodgdon manual I have that was written right at the turning point where plastic one piece shot wads and plastic hulls were the “new fangled thing” and people were still using paper hulls and card wadding to build loads as well. The only powder listed in the shot load section of that old book that is still around is HS-6 and all the others are discontinued but it is good for comparison purposes since it lists loads using both plastic wads and the old card wads side by side with powder charge and pressure differences (the old LUP pressure method) and has loads for lead shot, buck-shot, slugs, and blanks all listed both in plastic hulls and paper hulls with loads using wad columns consisting of one piece plastic wads, card/cork/fiber wad columns, and card/cork/fiber wad columns with a plastic gas seal unit only directly over the powder. It is an excellent source for studying how changes to the wad column affect a load if one doesn’t have their own equipment for doing their own experimental research.
    this is PART OF THREAD....
    rupert and Jhon like this.

 

 

Similar Threads

  1. 12ga shotgun slugs
    By Smallfoot in forum Shotgunning
    Replies: 65
    Last Post: 25-06-2021, 09:23 PM
  2. Shotgun Slugs
    By Bob Da Browning in forum Shotgunning
    Replies: 15
    Last Post: 11-12-2020, 11:15 AM
  3. lyman slugs load development
    By Tertle in forum Shotgunning
    Replies: 11
    Last Post: 24-11-2019, 08:41 PM
  4. Ghetto shotgun slugs
    By TheWuce in forum Shotgunning
    Replies: 12
    Last Post: 16-10-2018, 05:44 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!