Thread: "Karhu" A.K.A "Finnish Bear" 30-06 load developement

Originally Posted by 6.5 CRD

This has been my experience too for the most part however i had it happen twice where i had to re visit seating depth after removing magnetospeed. Both times i found the seating depth it liked to be very close to where it was happy with magnetospeed on (within 30 thou).

You might get away with leaving your loaded rounds and just bumping a few of them down a little shorter in a ladder and see how you go.


Sent from my iPhone using Tapatalk

Yup will give that a go too, just know better than to keep sending lead down range when I'm frustrated, will try magnetospeed on, then will try bumping seating depth to see if things improve if that doesn't work. Heck I could go back to the range and everything could be sweet as.....