Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

ZeroPak Delta


User Tag List

+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2021
    Location
    huntly
    Posts
    693

    LUBED GAS CHECKS, BULLET SEATING

    Hi all. Quick question. Does re-tumble lubing gas checked bullets and having lube on GC's have any positive affect on bullet seating? Consistent seating depth, reduced run-out? Thanks

  2. #2
    Member
    Join Date
    Oct 2015
    Location
    Morrinsville
    Posts
    15
    303 -sorry no experience when your question, but from a common sense perspective, i would say yes. Any lube is bound to help things.
    Im assuming your loading your casts in 303, i would be keen to learn what your doing. Im about to start loading casts for my Lee Metford

  3. #3
    Member
    Join Date
    Nov 2020
    Location
    Auckland
    Posts
    572
    Personally i dont believe neck tension is to blame for minute changes in seating depth (i get variations and i amp anneal and use a mandrel etc). What ive found is that there are often tiny changes in the actual shape of each bullet. That would be differences between dies or variation in raw materials. If you want absolute precision you gotta find and 'set aside' these bullets. Depends how precise your shooting must be.

    As for does lubing gas checks effect the seating?
    Yes, its likely to react with your powder. IMO, best to clean off your gas checks of any residue or anything known to react with powder. I dont believe that includes hi-tech powdercoat but it does include regular bake on PC.

    *My HRBC bullets pull out fine and the powder is 100% ok (after 6 months) so hi-tech appears not to react with powder.

    Dry lube would be fine for seating of course. I use that for seating anything.

 

 

Similar Threads

  1. Lee bullet seating die issues
    By Three O'Three in forum Reloading and Ballistics
    Replies: 22
    Last Post: 28-02-2024, 11:04 AM
  2. Bullet seating tool
    By Sideshow in forum Reloading and Ballistics
    Replies: 26
    Last Post: 24-09-2018, 12:57 PM
  3. Bullet seating depth
    By Brycey in forum Reloading and Ballistics
    Replies: 12
    Last Post: 17-02-2013, 11:46 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!